Advertisement
hole may need to be drilled in the chassis frame to accomplish this. Before drilling
the hole, make sure the drill's path will not come in contact with hidden wiring or
any other obstructions or vehicle components. Tighten the Nut securely.
4.
Mount the Electric Relay (not included), as shown in the Wiring Diagrams, to the
chassis frame near the Oooga Horn using a Bolt and Nut (not included). Tighten
securely.
5.
Make the connections to the Oooga Horn (1) and the Electric Relay (not included)
as shown on the Mounting and Wiring Diagrams. Always use terminal connectors
(not included) on all connections. Connect the terminal on the Electric Relay to a
30A fused circuit.
note: Most vehicles use a negative ground, but some vehicles employ a positive ground. If
this is the case, refer to Positive Ground Wiring Diagram. Pay attention to polarity.
connection is to the line positive
"+" point of the original horn
for technical questions, please call 1-800-444-3353.
SKU 96291
negative ground wiring diagram
electric relay
88
87
pushbutton horn switch
85
not included
51
30
30 a
existing vehicle fused circuit
+12 vdc
REV 08a
Page 4
Advertisement
