Strong SRT L 351 User Manual page 24

TROUBLE SHOOTING Q&A
Before requesting service for this player, please check the following table illustrating possible reasons of
the problems that you might encounter. Certain simple checks or adjustments on your DTV may
eliminate the problem and restore the proper operation.
Trouble
No picture, no audio
The number of DVBT channels is
not as many as we expected.
All of the channels show "No
Signal" or Mosaic tiles appear on
the display
Video is good, but no audio
Remote control does not work
The Handheld DTV does not
work at all
24
Possible Reason
The battery power is too low
Power cord is not properly
hooked up.
The receiver is not powered on.
The no. of stored channels is
small.
Signal Quality Level of certain TV
channels is too low.
Certain TV channels are not
provided locally.
No DVBT service is provided in
the area.
The voice volume is turned to low.
The audio is muted.
No power.
No power.
PART 1
Solution
Recharge the battery power
Check the power cord connection.
Click the "POWER" button to turn
on the receiver.
Please click the "AUTO" button or
"MANUAL" button key to re-scan
all of the channels.
Please put unit closer to a window
or to a more free view place to
increase the signal.
No way to watch these channels.
No way to watch these channels.
Click the "VOL+ " button to raise
the volume.
Click the "MUTE" button to
disable the mute function.
Check the battery of the remote
controller.
Check the battery pack! It is placed
up side down!
English