Summary of Contents for SSI America NEO CHANGER
-
Page 1: Instruction Manual
Instruction Manual SSI America 43C Rocklyn Ave Lynbrook, NY 11563 Phone 516-887-8885 Fax 516-887-8881 Multi Technology Equipment LLC ( SSI AMERICA ) v.1.3.A All Rights Reserved... -
Page 2: Table Of Contents
T able of Contents C H A P T E R Installation Preparation (All Vehicles) Anti-Vibration Setup Load/Unload Magazine C H A P T E R Dip-Switch Overview (REQUIRED) Acura Audi Ford (Ford, Lincoln, Mercury) GM (Buick, Cadillac, Chevy, GMC, Oldsmobile, Pontiac, Saturn) 10-11 Chrysler (Jeep, Dodge, Plymouth, Eagle) 13... -
Page 3: Installation Preparation (All Vehicles)
Neo Changer, it must be read by all users. Thank you for purchasing the Neo Changer. Since the Neo Changer will works in many different vehicles the following steps must be taken to ensure the changer is set up correctly for the vehicle it is being installed in. -
Page 4: Anti-Vibration Setup
P R E P A R A T I O N First Step (For All Vehicles) The first and most important step in using the Neo Changer is setting the dip-switches on the black box; this makes the changer compatible with the vehicle it is being installed in. -
Page 5: Load/Unload Magazine
The CD changer is designed to play commercially pressed 12cm audio CD’s only. Some recordable CD’s may not function correctly when used in the Neo Changer. Irregular shaped CD’s should never be used. The best recordable CD’s to use with the changer are those with a blue bottom. -
Page 6: Vehicle Installation
In this chapter you will learn how to install the Neo Changer in specific vehicles, as well as set the black box (Converter box). The black box ( Converter box) included with your Neo Changer is what connects the changer to your vehicles factory car stereo. This black box connects to the Neo Changer, and to the specific cable needed for your car. -
Page 7: Dip-Switch Overview (Required)
V E H I C L E I N S T A L L A T I O N Dip-Switch Overview The dip switches can be found on the side of the black plastic box that connects to the changer. Switches are in the “ON” position when they are switched DOWN. Black box settings for each vehicle can be found on the vehicles installation page. -
Page 8: Acura
10 discs in the magazine, but the readout will be wrong. This is not a technical problem; the car stereo was designed for no more than six discs. Switch to the Neo Changer by pressing the CD button on the radio. This step O P E R A T I O N may take up to three minutes. -
Page 9: Audi
§ Audi A8 (2003-2004) – Not Compatible. § Audi A6 (2004) – Not Compatible. Once you connect the Neo Changer, turn on your radio. A CD icon will appear on the display of your radio showing that the Neo Changer is ready to use. This step may take up to three minutes. -
Page 10: Ford (Ford, Lincoln, Mercury)
Please use only the first six slots in the CD magazine. After setting the dip switches connect the Neo Changer directly to the radio using the Ford 12-pin cable. To change discs simply press the disc number. - Page 11 V E H I C L E I N S T A L L A T I O N Model Year(s) Changer Location and notes Model Year(s) Changer Location and Notes Ford Continental 1998-2004 20-Pin connector behind Radio. 16-Pin connector behind Radio. Crown Victoria 1995-1997 Premium Audio System...
-
Page 12: Oldsmobile, Pontiac, Saturn)
GM (Buick, Cadillac, Chevy, GMC, Pontiac, Saturn) *PLEASE READ* *1995-1999 Radios with built in CD player (Except Corvette) are NOT compatible with the Neo Changer. *2000-2004 Radios with built in CD player ARE compatible. Separate OEM CD (1995-2004) or OEM Cassette (2000-2004) must be disconnected to use the Neo Changer. - Page 13 V E H I C L E I N S T A L L A T I O N Chevrolet - continue Model Year(s) Changer Location and Notes Notes for Buick: GM-C Cable behind Headunit Buick Requires GM factory CD data cable part Equinox 2005 Protocol: XM / Class 2...
- Page 14 C L A S S To change tracks simply press “Seek <” or “Seek >” Switch to the Neo Changer by pressing the “Band” button, until you see XM1. O P E R A T I O N The screen will change to D1 T1 ( Disc 1, Track 1) F O R Cars using GM-C cable can change disc by turning “P-TYPE”...
-
Page 15: Chrysler (Jeep, Dodge, Plymouth, Eagle)
“1”. If you see it, it means that your radio can control the Neo Changer. Before connecting any cables you must set the dip switch box to the position listed for your vehicle. If you set the dip-switches after you have connected cables to the box, you must disconnect and reconnect them for the changer to operate. -
Page 16: Honda
#7. ( you can fast forward the track, but you must let it play the last 5 seconds of the track, for it to change to disc # 7 Switch to the Neo Changer by pressing the “CD” button. O P E R A T I O N To change discs press “Disc -”... -
Page 17: Toyota
Some radio models require pressing “Seek >” once to start playing after changing CD or after startup. Switch to the Neo Changer by pressing the “CD” button. O P E R A T I O N Follow the LCD readout instructions to change CD’s and tracks. -
Page 18: Volkswagen
Cause: VW prewired cable to trunk not shielded and is causisng noise from changer datalines, into audio lines Switch to the Neo Changer by pressing the “CD” button on O P E R A T I O N the radio. -
Page 19: Troubleshooting
Radio and plug again Magazine will not eject Changer did not reset properly Press the reset button near the after power down eject button on the Neo Changer, then press eject For technical support call 516-887-8885 9am-6pm EST. After hours call 516-225-0460... -
Page 20: Warranty/Warnings
Notices, Warnings, and Warranty Info One Year Limited Warranty The quality controls used in the manufacture of this product ensure your satisfaction. This warranty applies only to the original purchaser of this product from an authorized dealer. This warranty covers any supplied or manufactured parts of this product that, upon inspection by SSI authorized personnel, is found to have failed in normal use due to defects in material or workmanship. -
Page 21: Fcc And Legal Information
1. Use of headphones while operating an automobile or moving vehicle is not recommended and is unlawful in some countries and areas. 2. Be careful and attentive on the road. Stop operation of the Neo Changer if you find it disruptive or distracting while driving. The driver of a motor vehicle should not operate the Neo Changer while driving. -
Page 22: Ford Appendix
FORD Appendix Neo Changer Connection 2004 - Town Car, Grand Marquis, Marauder, LS and Ford Crown Vic. 1. Preparing the Neo Ford-12pin Cable Take the Neo Ford 12pin cable and cut off the black 12-pin harness. You will use only the cable and big White 22 pin connector (connects to the black box). - Page 23 GM – Corvette Appendix Neo Changer Connection to Chevrolet Corvette Most Corvettes are pre-wired to the trunk. In case you can’t find the connector in the trunk, please do the following: 1. Preparing the Neo GM-A Cable Take the Neo GM-A cable and cut off the Black and Red harness, you will then have two cables in your hands.
- Page 24 GM – Cadillac; Oldsmobile; Buick that use E&C protocol (1995 – 1999 ) - Cable in trunk can’t be found Most 1995 – 1999 Cadillac’s, Oldsmobile’s & Buick’s are pre-wired to the trunk. In case you can’t find the connector in the trunk, please do the following: 1.
Need help?
Do you have a question about the NEO CHANGER and is the answer not in the manual?
Questions and answers