Connection - Panasonic SC-HDX3 Operating Instructions Manual

Connection

Speaker connection
Note
Confirm the colours of the cords to ensure correct connection. Incorrect connection can damage the unit.
Before
connection:
To prepare the
speaker cables,
twist the vinyl tip
and pull off.
Red
Black
Surround speaker (right)
Connecting the cables
(Connection to the amplifier)
1 2
Connection to a system
This explains connection to SC-HDA710.
Connect so the white
line is to the left
Flat cable (only needed when connecting SC-HDA710, included)
Note
¡The included AC mains lead is for use with this unit only. Do not
use it with other equipment.
¡A subwoofer cannot be connected to this unit. Connect it to
SC-HDA710.
Speaker cable
(long, included)
Red
L
R
Black
CENTER
Black
(Connection to the speakers)
1
NO
Stereo phono
cable (included)
White (L)
Red (R)
5.1 ch AUDIO OUT
CENTER SURROUND
L
R
SUBWOOFER
Connect so
the white line is higher
Insertion of connector:
Even when the connector is perfectly
inserted, depending on the type of inlet
used, the front part of the connector may jut
out as shown in the drawing.
However there is no problem using the unit.
5
Surround speaker (left) Center speaker
Speaker cable
(long, included)
Speaker cable
Red (short, included)
2
Monaural phono cable
(included)
L
LINE IN
R
READ THE CAUTION FOR
THE AC MAINS LEAD ON
CENTER
PAGE 3 BEFORE
CONNECTION.
AC mains lead
(included)
Connect this cord only
after all other cables
and cords are
connected.
NO
Household
mains socket
Connector
Approx. 6 mm
Appliance inlet