American Standard Champion Select Elongated Right Height Toilet 2057.212 Specification Sheet

CHAMPION ® SELECT ELONGATED
RIGHT HEIGHT™ TOILET
❑
2057.212
• Vitreous china
• EverClean™ anti-microbial glaze
(available Summer 2006)
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion® Flushing System
performance platform
• 3" non-adjustable, fl apper-free fl ush valve
• 16-1/2" rim height for accessible applications
• Elongated siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Speed Connect™ tank/bowl coupling system
• Trip lever color-matched to toilet
• Sweeping pier on bowl
• 100% factory fl ush tested
• 2 bolt caps
• 10 year warranty
❑
3225.016 Elongated Right Height™ Bowl
❑
4272.216 Tank
Nominal Dimensions:
772 x 489 x 873mm
(30-3/8" x 19-1/4" x 34-3/8")
Fixture only, seat and supply by others
Compliance Certifi cations -
Meets or Exceeds the Following Specifi cations:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specifi cation for
Non-Adjustability - July, 2003 revision
To Be Specifi ed:
❏ Color:
❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
❏ Seat: (please specify color)
❏ Champion
® Slow Close Elongated #5325.010
❏ Rise & Shine Elongated #5324.019
❏ Laurel Elongated #5311.012
❏ Supply with stop:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
© 2006 American Standard Inc.
ELONGATED RIGHT HEIGHT™ TOILET
FINISHED WALL
772mm
(30-3/8)
19mm ± 6mm
(1 ± 1/4)
216mm
(8-1/2)
16mm
(5/8)
264mm
(10-3/8)
(14-1/4)
305mm C/L OF OUTLET
(12)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
IMPORTANT: Dimensions of fi xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
K26
CHAMPION
470mm
(18-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
SUPPLY
AS
REQ'D
419mm
(16-1/2)
*
254mm
(10)
152mm
(6)
FINISHED
FLOOR
362mm
®
SELECT
VITREOUS CHINA
489mm
(19-1/4)
356mm
(14)
873mm
(34-3/8)
254mm
(10)
Revised 5/06