Gordon 92499 Operating Instructions Manual

9” hot laminator

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

9" HOT LAMINATOR

Model 92499

OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

2004 by Harbor Freight Tools

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

Table of Contents

Need help?

Do you have a question about the 92499 and is the answer not in the manual?

Questions and answers

Summary of Contents for Gordon 92499

Page 1: Operating Instructions
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353.
Page 2: Product Specifications
When unpacking, check to make sure all the parts shown on the Parts List on page 11 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Page 3: Work Area
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from the Laminator. Loose clothes, jewelry, or long hair can become caught in the Laminator, causing per- sonal injury. Avoid accidental starting. Be sure the Power Switch is off before plugging in.
Page 4: Electrical Safety
Do not use the Laminator if the Power Switch does not turn it on or off. Any equipment that cannot be controlled with the Power Switch is dangerous and must be replaced. Disconnect the Power Cord Plug from its electrical outlet before making any adjustments, changing accessories, or storing the Laminator.
Page 5: Grounded Tools: Tools With Three Prong Plugs
Laminator is intended for indoor use only. Do not abuse the Power Cord. Never use the Power Cord to carry the Laminator or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately.
Page 6: Extension Cords
5.1-7.0 7.1-12.0 12.1-16.0 16.1-20.0 *Based on limiting the line voltage drop to five volts at 150% of the rated amperes. FIGURE B SKU 92499 For technical questions, please call 1-800-444-3353 3-PRONG PLUG EXTENSION CORDS (110 VOLT) EXTENSION CORD LENGTH FEET...
Page 7: Specific Safety Rules
Protect your extension cords from sharp objects, excessive heat, and damp or wet areas. Maintain labels and nameplates on the Laminator. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replace- ment. Always place the Laminator on a dry, flat, level, sturdy non flammable work surface capable of supporting the weight of the Laminator and any addi- tional accessories.
Page 8 Never place objects on top of the Laminator. Always check to make sure the Cooling Vents on top of the Laminator are not obstructed. Turn off the Laminator and unplug it from its electrical outlet before remov- ing any jammed paper or film.
Page 9 Also, the internal rollers will begin turning. (See Figure D.) IMPORTANT: Prior to laminating, always allow 7 to 8 minutes for the Laminator to warm up and wait until the Green LED Light (4) illuminates, indicating the Laminator is “READY”...
Page 10: Inspection, Maintenance, And Cleaning
Front Guide (6). Once inserted into the Laminator, the laminating object will be automatically drawn into the Laminator and ejected from the Rear Guide Platform (7). To avoid possible accidental burns, make sure to wear safety gloves (not included) when first removing the laminating object from the Rear Guide Platform.
Page 11: Please Read The Following Carefully
Description Power Switch Power Cord Red LED Light Some parts are shown for illustration purposes only, and are not available individually as replacement parts. SKU 92499 For technical questions, please call 1-800-444-3353 Part # Description Green LED Light Front Platform...