Sanus ELM205 Specifications

Specifications

• 2,700 joule surge suppression

• Dual Stage EMI/RFI noise filtration 20-50dB (100KHz-1MHz)

• Gold-plated coaxial input and outputs

• Combo ethernet/phone jack - supports up to 100Base-T connection speeds

• 15A/125V/60Hz

• 330V UL clamping voltage

• Audible alarm if surge has served it's useful life

• Resettable fuse

• Interchangeable 1' or 6' power cords

• ClickFit compatible

Your Sanus ELM205 has a five year product warranty against manufacturer's defects. If you have any questions or experience any

problems with your Sanus Elements product, please contact Sanus Systems Customer Service at 1-800-359-5520.

[01] x 1

Avoid potential injuries! Do not disassemble the surge protector. Disassembling the surge

protector will void the warranty and may cause serious personal injury.

Avoid potential damage to your electrical components! Disconnect the surge protector during

lightning storms. Not for use near water or in areas with high moisture.

This product contains small items that could be a choking hazard if swallowed. Keep these items

away from young children!

Hardware and procedures for multiple mounting configurations are included. When you see this symbol,

OPT

choose the correct configuration to suit your needs. Not all hardware included will be used.

are used for identification purposes and are trademarks of their respective owners.

ELM205 Power Conditioner

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA

Customer Service: 1-800-359-5520 • info@sanus.com • www.sanus.com

(6901-100215 <00>)

[02] x 1

[03] x 2

[04] x 2

LISTED

[05] x 1

Table of Contents

Do you have a question about the ELM205 and is the answer not in the manual?

Page 1 • ClickFit compatible Warranty Your Sanus ELM205 has a five year product warranty against manufacturer’s defects. If you have any questions or experience any problems with your Sanus Elements product, please contact Sanus Systems Customer Service at 1-800-359-5520. Package Contents...
Page 2 Specifi cation Views The Power, Surge, and Ground LED lights illuminate to indicate that the surge protector is working. If the lights fail to illuminate, see Troubleshooting your Power Conditioner on the next page. Power Surge Ground To phone/modem or From wall, DSS, cable, or other coaxial output ethernet input To TV, VCR, or other coaxial input...
Page 3 Troubleshooting your Power Conditioner The Power, Surge, and Ground LED lights illuminate under normal operating conditions. If any of the lights fail to illuminate, follow the instructions below. If any of the lights still fail to illuminate, you need to replace your Power Conditioner. Power •...
Page 4 Installing ClickFit NOTE You should use the ClickFit brackets that are included with select Sanus mounts, and the hardware, [03] and [04], that is included with the ELM205. [03] [04] Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.