Panasonic Viera TH-37PX8B Operating Instructions Manual page 56

On screen messages
No Recording - Unknown reason
No Service
No Signal
PIN incorrect !
Please check settings and connections on
HDMI devices.
Please wait.
Recording this service now
Sending Preset Data Please wait !
Shipping condition completed.
TV can now be switched off.
Software successfully updated
Press EXIT to continue
Software Update failed. Please try again later.
Press EXIT to continue
Timer already expired !
Timer Event Due to Start
DVB 1: BBC1 has been
Programmed for recording at 20:00
Timer incorrect !
Tuner Locked
Please stop recording to operate
Unable to download, Check Equipment
56
Message Meaning / Action
•
The recording may not be performed. Check the equipment.
•
Disc or tape may be full.
•
The broadcaster has stopped the service.
•
Check the connection of the RF cable.
•
The PIN number you entered is wrong.
•
Communication error in VIERA Link function (p. 44).
•
A function is in progress.
•
The recorder is recording the programme signal from its own tuner.
You can turn the TV off and leave the equipment recording in the
normal way.
•
Q-Link or VIERA Link programme download is in progress.
•
"Auto Setup" will automatically start when Mains power On / Off
switch is next turned On. (p. 12)
•
The software updating is fi nished.
•
Perform "System Update Search Now" in System Update (p. 31).
If this is still unsuccessful, there may not be any new software
available.
•
Starting time in Timer Programming is already past. Set correctly
(p. 41).
•
This message will appear 2 minutes before timer programming
event due to start.
•
Set Start and End times in Timer Programming correctly (p. 41).
•
If you want to unlock, cancel Direct TV Recording (p. 43 and p. 45)
or Timer Programming (p. 40).
•
The tape or disc is active. Stop the equipment and try again.