Table of Contents
Advertisement
The CD 9 remote control is provided with your C 546BEE Compact Disc Player
to enable you to operate playback functions from the comfort of your chair or
from virtually anywhere in the room. For reliable operation, there should be a
clear line-of-sight path from the remote control to the front of the CD player. If
the player does not respond to remote commands, it may be that this line-of-
sight path is obstructed by clothing, paper or furnishings.
Most of the buttons on the remote control handset have the same effect as the
corresponding buttons on the front panel of the player. In addition, the handset
is equipped with some extra buttons like the following function keys.
NUMERIC KEY PAD
Using the direct-entry numeric keypad (0 to 9) causes the C 546BEE to jump
directly to the beginning of a numbered track and commence play. Thus, to
play Track 5, simply press "5". To play Track 20, press "2" and "0".
REPEAT
A particular track or file can be repeatedly played back by pressing [RPT]
button. Toggle this button to repeat a track/file, folder, all tracks or all files.
Corresponding icons like REPEAT, REPEAT FOLDER, or REPEAT ALL will
be illuminated in the VFD as the particular repeat mode is selected. Turn
off repeat mode by pressing the REPEAT button until the REPEAT icon is
extinguished in the VFD.
RPT A-B
To repeat a sequence, implement the following procedures:
1 Press [RPT A-B] at your chosen starting point. "REPEAT A
illuminated in the VFD with "B" blinking.
2 Press [RPT A-B] again at your chosen end point. "REPEAT A
illuminated. The repeat sequence begins.
3 Press [RPT A-B] again to cancel the sequence.
USING THE C 546BEE – CD 9 REMOTE CONTROL
DIM
Toggle to reduce, turn off and restore VFD brightness.
PROGRAM AND CLEAR
Use [PROG] button to start, review, edit or exit programming mode. In
combination with [PROG] button, the [CLEAR] button allows the deletion of
a programmed track during program review or edit sequence.
the item about "PROGRAMMING" at the "USING THE C 546BEE – CD MODE"
section of the "OPERATION"
FILTER
The [FILTER] button is used for selecting the bandwidth of the audio low
pass filter for the CD, MP3 and WMA media being played. The options are
NORMAL bandwidth and SLOW bandwidth. For some recordings, the SLOW
bandwidth may provide a wide frequency range and spatial feeling.
NORMAL: Select NORMAL bandwidth to engage a standard CD high-
pass filter slope for playback of CD, MP3, and WMA music through the
two channel stereo audio jacks.
SLOW: Select SLOW bandwidth to engage a gentle high-pass filter
slope for playback of CD music through the two channel stereo audio
jacks. This feature is particularly useful for higher bit rate recordings. A
red icon is illuminated in VFD when SLOW filter is selected.
B" is
B" stay
OPERATION
Refer also to
page.
13
Hide quick links:
Advertisement
Table of Contents
