Table of Contents
Advertisement
VCR Playback / VCR Functions
VCR display
Panasonic VCR
Programme List
1/2
Pos
Name
Date
Start
1.
*** 01
27/10
17:44
2.
*** 01
28/10
15:00
8
VCR Playback
n When a cassette is inserted, the VCR switches on automatically.
n When a cassette without an erasure prevention tab is inserted, the VCR will automatically start playback.
n The cassette will automatically rewind when the tape end is reached.
n The CVC System (Crystal View Control) ensures optimum picture quality.
Normal Playback
n Press this button
to start Playback.
Stop Playback
n Press this button
to stop winding a tape or to stop recording.
Still Playback
n Press this button during playback.
n Resume normal playback by pressing this button again or Playback
low Playback
S
n
Keep this button pressed down for more than 2 seconds during playback.
n Resume normal playback by pressing Playback
Note: For search functions, see page 5.
Erasure prevention of a cassette
To prevent the accidental erasure of a cassette, remove the erasure prevention tab. If you want to record again on a
cassette with erasure prevention, and this symbol f is flashing on the VCR display, then cover the hole with adhesive tape.
NTSC Playback Function
This function allows to playback tapes on PAL TV which were recorded in NTSC. On some TV pictures may be distorted
during NTSC playback. Try to adjust your TV. For this purpose, please also read the operating instructions for your TV.
Dubbing or recording of NTSC tapes with this VCR is not possible.
Repeat Playback Function
>
Press Playback
for more than 5 seconds when the VCR is on stop mode (the letter R will appear on the OSD).
The VCR will keep replaying the cassette until the end of the recorded part. Press Stop
Child lock Function
To deactivate the buttons on the unit and the remote control, press the |ENTER| and |EXIT| buttons at the same time
until this display appears. This display will also appear if attempts are made to operate the unit when this function is
activated, to inform that the unit cannot be operated. To cancel the Child Lock Function, press the same buttons
until the display disappears.
If the power supply of the unit is disconnected, the Child Lock Function is cancelled after about 60 minutes.
Playback Off Timer Function (to stop Playback automatically)
To stop the playback after a preset time, press Playback
You can extend the playback time from 30, 60, 120, 180 to 240 minutes by pressing the button repeatedly .
To stop in advance press Stop
Intro-Jet Scan Function
You can playback the beginning of each recording with the Intro-Jet Scan Function. Press the |SEARCH| button.
The VCR will rewind to the start of the tape, and play with high speed for 10 seconds the beginning of each recording
(which is longer than 15 minutes). Once you have found the recording, press Playback
To cancel the search function, press the Stop
Note: For more explanation of the SEARCH button, see Programme List.
Programme List
The List of the Timer recordings are stored if the recordings are longer than 15 minutes (EP mode 25 minutes)
and the cassette was not removed.
n Press |SEARCH| to display the [Programme List].
n Select the programme :; .
n By pressing the |SEARCH| button again, the VCR will wind the tape to the selected programme and start to playback.
n If you select another programme, press |SEARCH| again, the playback will stop and the [Programme List] will appear.
n Press |EXIT| to quit the menu.
Note: If you have removed the cassette, or the power supply was interrupted, the Intro-Jet Scan will be activated
when pressing the |SEARCH| button.
VHS Index Search System
To quickly find the beginning of a programme, press forward INDEX
This function only works on playback mode or in stop mode. Depending on how many times you press these INDEX
buttons (up to a maximum of 20 times), the VCR will search through the tape to find the start of the programme,
and will automatically start playback (for each programme which is longer than 5 minutes).
For example, if you press the INDEX button three times, the VCR will search for the third programme.
To cancel the Index Search System, press Stop
>
.
>
on the VCR for more than 3 seconds during playback.
`
`
. The selected length of playback time will appear on the VCR display.
`
`
.
`
`
.
>
.
`
`
to exit this function.
>
.
j
, or press backward INDEX
k
.
RQTD0021-B
Hide quick links:
Advertisement
Table of Contents
