ENG
Switching Your Television On and Off
TV
Placing Your Television in Standby Mode
TV
12
The mains lead is attached to the rear of your television.
☛
If you have purchased this television in the United
Kingdom, refer to page 55 for further instructions on
plug wiring.
1
Plug the mains lead into an appropriate socket.
➣
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2
Press the " I " button (On/Off) on the front of the television.
Result:
The Standby indicator on the front of the television
lights up.
3
Press the POWER (
television on.
Result:
The programme that you were watching last is re-
selected automatically.
➣
If you have not yet stored any channels, No clear picture
appears. Refer to "Storing Channels Automatically" on page
18 or "Storing Channels Manually" on page 21.
4
To switch your television off, press the " I " button (On/Off) again.
Your television can be placed in Standby mode, in order to reduce
the power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER (
Result:
The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2
To switch the television back on, simply press the POWER (
button again.
➣
You can also switch on by pressing the P
☛
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the " I "
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
) button on the remote control to switch the
) button on the remote control.
or
)
button.