Auto Setup; Editing Channels - Panasonic Viera TH-37PX70B Operating Instructions Manual

Auto Setup

Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
1
Auto Setup - Digital and Analogue
Digital Scan
Analogue Scan
This will take about 3 mins.
INPUT
OPTION DIRECT TV REC
EXIT
RETURN
2
3
TV
10
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
•
You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
•
Auto Setup will start to search for
21 68
TV channels and store them.
21 68
Channel Service Name Type Quality The sorted programme order
62 CBBC Channel DVB 10
62 BBC Radio Wales DVB 10
depends upon the TV signal,
62 BBC Radio Cymru DVB 10
62 E4 DVB 10
62 Cartoon Nwk DVB 10
the broadcasting system and
29 Analogue
-
33 BBC1 Analogue -
reception conditions.
EXIT
•
If a compatible recording equipment
with Q-Link or similar technologies
DOWNLOAD IN PROGRESS
(p. 38) is connected, analogue
PLEASE WAIT
channel information is automatically
Programme : 63
Remote control unavailable
downloaded to the equipment.
■
When inputting owner ID
Following the on-screen operation
Owner ID 1 of 2
guide, enter your own choice of PIN
Please enter new PIN
PIN
* * * * number, name, etc.
•
For detailed procedures
EXIT
Page up
Change 0 9 PIN entry
"Owner ID" (p. 33)
•
RETURN Page down
Make a note of the PIN number
in case you forget it.
■
When inputting owner ID later
•
If you input the ID later
EXIT
"Owner ID" (p. 33)
Select the picture setting
Viewing Mode
Please select your preferred viewing mode.
Dynamic Normal Cinema
•
Also possible to change the setting
in Picture Menu (p. 22)
Auto Setup is now complete and your TV is ready for viewing.
•
To check programme list
at-a-glance
TV Guide (p. 14)
•
To edit channels
Editing Channels (p. 28)
Analogue Programme Edit (p. 31)
Using the
On Screen
Displays
select
Note
•
set If tuning have failed
•
If downloading have failed
•
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.
Many features available on this TV can be accessed via the On Screen Display
menu.
■
How to use remote control
Open the main menu
Move the cursor / select the menu
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options
have been set
RETURN
Return to the previous menu
EXIT
Exit the menu system and return to the normal viewing screen
■
ON SCREEN HELP Instructions box
(example: Owner ID)
Owner ID 1 of 2
Please enter new PIN
PIN
* * * *
EXIT
Page up
Change PIN entry
0 9
RETURN Page down
On-screen operation
guide will help you.
"Auto Setup" (p. 30).
"Download" (p. 23).
11