Setting The Time; Convenient Functions - Panasonic SC-AK28 Operating Instructions Manual

1
2
4
1
For Australia and New Zealand
2
3
4
A
B

Setting the time

This is a 24-hour display clock.
This example in the figure shows how to set the time for 16:25
(4:25 p.m.).
3
For United Kingdom
To display the time when system is ON
Press [CLOCK/TIMER] to select "CLOCK".
At ECO mode on, to display the time when system is OFF
Press [-DISP/–DEMO].
The time will be displayed for about 5 seconds and then the display
will return to whatever was previously displayed.

Convenient functions

Switching displays A
Press [-DISP/–DEMO] to select the desired spectrum
analyzer.
Every time you press the button:
Normal
To mute the volume B
by remote control only
This feature is convenient when you have a telephone call, etc.
Press [MUTING].
Press the button again to cancel.
"MUTING" goes out.
Muting can also be cancelled by lowering the volume all the
way (--dB).
When the system is turned off, the muting operation will be automatically
cancelled.
Press [f/ 7] to switch on the system.
Press [CLOCK/TIMER] to select "CLOCK".
Every time you press the button:
CLOCK PLAY REC
Previous display
(within 7 seconds or so)
Press [TUNE/TIME ADJ (3 or 4)] to show the present
time.
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you
set the time.
A
Peak hold Aurora Wiper
(OFF)
11
RQT5265