How To Set The Display Location Number For Each Plasma Display - Panasonic TH-37PW5 Operating Instructions Manual

How to set the display location number for each Plasma Display

4
5
6
R
Notes:
(1) For PC or RGB input signals, normal multi-display magnification is only available at the VGA resolution.
(2) The multi-display capability is not functional for component signals.
(3) The MultiDisplay (multiskærmdisplay) function does not display certain input signals from the terminals of the
installed option boards listed below:
• Component input signals from the scart and RCA terminals of scart terminal board (TY-37TM5T or TY-42TM5T)
Press to select Ratio (2nd step).
Press to select "2 2", "3 3".
Press to select Location.
Press to select the required arrangement
number. (A1-C3 : Refer to the following)
Display Number locations for each arrangement
A1 A2
B1 B2
Press twice to exit from Setup.
Setup for MULTI DISPLAY
MULTI DISPLAY Setup
MULTI DISPLAY Setup
Ratio
Location
MULTI DISPLAY Setup
MULTI DISPLAY Setup
Ratio
Location
A1 A2 A3
B1 B2 B3
C1 C2 C3
On
2 2
A1
On
2 2
A1
31