Samsung Refrigerator User Manual page 3

For R600a refrigerant models only
WARNING
• This appliance contains a small amount of
isobutane refrigerant(R600a), a natural gas
with high environmental compatibility that is,
however, also combustible. When transporting
and installing the appliance, care should be
taken to ensure that no parts of the refrigerating
circuit are damaged. Refrigerant squirting out
of the pipes could ignite or cause an eye injury.
When refrigerant leaks from the pipe, avoid any
naked flames and move anything flammable
away from the product and ventilate the room
immediately.
- Failing to do so may result in fire or explosion.
In order to avoid the creation of a flammable
gas-air mixture if a leak in the refrigerating
circuit occurs, the size of the room in which
the appliance may be sited depends on the
amount of refrigerant used. Never start up an
appliance showing any signs of damage. If in
doubt, consult your dealer. The room must be
1 m in size for every 8 g of R600a refrigerant
3
inside the appliance. The amount of refrigerant
in your particular appliance is shown on the
identification plate inside the appliance.
SEVERE WARNING SIGNS
FOR INSTALLATION
WARNING
• This refrigerator must be properly installed and
located in accordance with the manual before it
is used.
• Do not install the refrigerator in a damp place or
place where it may come in contact with water.
- Deteriorated insulation of electrical parts may
cause an electric shock or fire.
• Do not place this refrigerator in direct sunlight or
expose to the heat from stoves, room heaters
or other appliance.
• This appliance must be properly grounded.
Do not ground the appliance to a gas pipe,
plastic water pipe, or telephone line.
- You must ground the refrigerator to prevent any
power leakages or electric shocks caused by
current leakage from the refrigerator.
- This may result in an electric shock, fire,
explosion, or problems with the product.
- Never plug the power cord into a socket that is
not grounded correctly and make sure that it is
in accordance with local and national codes.
• Plug the power plug into the wall socket firmly.
Do not use a damaged power plug, damaged
DA68-02676A(0.0)-EN.indd 3
power cord or loose wall socket.
- This may result in an electric shock or fire.
• Do not plug several appliances into the same
multiple power board. The refrigerator should
always be plugged into its own individual
electrical which has a voltage rating that
matched the rating plate.
- This provides the best performance and
also prevents overloading house wiring
circuits, which could cause a fire hazard from
overheated wires.
• If the wall socket is loose, do not insert the
power plug.
- There is a risk of electric shock of fire.
• Connect the power plug in proper position with
the cord hanging down.
- If you connect the power plug upside down,
wire can get cut off and cause fire or electric
shock.
• Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
Do not hook the power cord over a metal
object, place a heavy object on the power
cord, insert the power cord between objects, or
push the power cord into the space behind the
appliance.
- When moving the refrigerator, be careful not to
roll over or damage the power cord
- This may result in an electric shock or fire.
• Do not use a cord that shows cracks or
abrasion damage along its length or at either
end.
• If the power cord is damaged, have it replaced
immediately by the manufacturer or its service
agent.
• Do not bend the power cord excessively or
place heavy articles on it.
• When moving the refrigerator, be careful not to
roll over or damage the power cord.
- This constitutes a fire hazard.
• Make sure that the power plug is not squashed
or damaged by the back of the refrigerator.
• Keep the packing materials out of reach of
children.
- There is a risk of death from suffocation if
children put them on their head.
• This appliance should be positioned in such a
way that it is accessible to the power plug.
- Failing to do so may result in an electric shock
or fire due to electric leakage.
• Do not install this appliance near a heater,
inflammable material. Do not install this
appliance in a humid, oily or dusty location, in
safety information _03
2012.7.17 10:17:14 AM