Advertisement
Mounting Lens Adaptor And Conversion Lens
1. Remove the lens ring on the front of the camera by rotating it to the left.
2. Attach the Lens Adaptor to the camera by rotating it to the right.
3. Attach the WIDE or TELE Conversion Lens onto the adaptor by rotating to the right.
Precautions For the Mounting Of the Lens Adaptor And Conversion Lens
Properly engage the screw threads by rotating slightly when screw-mounting
the Lens Adaptor or the Conversion Lens. Do not apply too much force to
fasten the devices together.
Improperly engaged screw threads may damage the thread ridges and/or
cause blurred photographs. Also, applying too much force to fasten the
devices may damage the camera or cause difficulties in removing
the lens or lens adaptor.
The company will not bear any responsibility relating to problems
that occurred due to user carelessness in connecting the
devices. Therefore, please carefully read the precautions in the
User Manual thoroughly before using the product.
Usage Precautions For Lens Adaptor (SLA-3537)
Turn off the camera when attaching or removing the Lens Adaptor.
Remove the lens ring located at the lens barrel area to attach the Lens Adaptor and be careful not to lose the removed lens ring.
After using the Lens Adaptor, remove the Lens Adaptor and replace the lens ring.
When connecting the Lens Adaptor to the camera, make sure it is tightly attached.
(However, applying too much force to fasten the Lens Adaptor may cause difficulties when dismantling)
To assemble the Lens Adaptor accurately, place the camera and the Lens Adaptor horizontally and then turn the Lens Adaptor to the
left by 180 degrees. Then, turn it to the right so that the screw threads get engaged properly.At this point you should be able to easily
screw on the Lens Adaptor.
Usage Precautions For Conversion Lens (SCL-T3755/W3755)
Make sure to tightly fix the Conversion Lens when mounting it onto the Lens Adaptor.
(However, applying too much force may cause difficulties when removing the lens)
Use the LCD monitor instead of the viewfinder when using with the Conversion Lens since the subject being photographed will be
partially blocked by the Conversion Lens when viewed through the viewfinder.
Use the camera's built-in self-timer function instead of the remote control when using with the Conversion Lens since the lens may
block the remote control receiving port and the remote control may not function properly.
A picture taken in the dark with the Conversion Lens may be out of focus since the lens blocks AF Support Light. In such cases, use
external lightings or move to a brighter location.
Do not use flash units with the Conversion Lens mounted since the lens blocks the lighting control sensor and causes an incorrect
exposure level.
The distance displayed on the LCD is different from the actual distance when using the Manual Focusing Mode with the Conversion
Lens mounted.
Use in automatic focusing mode only when using with the Conversion Lens. A picture may be out of focus when used in manual
focusing mode, scene mode, or night-scene mode.
Using the WIDE function to zoom with the TELE Conversion Lens mounted may cause a darkening effect at the borders or decreased
resolution. In such cases, adjust zoom until these effects disappear.
SCL-T3755 : Please shoot in TELE mode
SCL-W3755 : Please shoot in WIDE mode
Mounting of a MC (Multi Coating) protector or filter onto the WIDE Conversion Lens may cause a darkening effect at the borders.
Adjust the zoom until the effect disappears.
Do not apply sudden or excessive force to the lens when the Conversion Lens is mounted. Such actions may damage the lens-
[Lens Ring]
connecting part, or damage the camera, or cause blurred photographs.
[Lens Adaptor]
Conversion Lens(SCL-T3755/W3755) Maintenance
[Conversion Lens]
Clean the Conversion Lens and the Lens Adaptor with a blower brush first and then use a fine cloth to gently remove dust. When this
method is ineffective, use a lens cleaning paper with a small amount of lens cleaning solution to remove the mark or stain.
Do not let flammable substances such as paint thinner, benzene, or insecticide come in contact with any parts of the product or
attachments.
Such substances may cause paint to come off or lead to deterioration and/or deformation.
Keep the lens cap on the Conversion Lens when not using the lens.
3
4
6806-2137
Advertisement
