Advertisement
5.
With the garage door still in the raised position remove the Threshold. Apply two
1/4" rows of adhesive (not included) between the two lines running parallel the
length of the garage door opening. Apply the adhesive lines 3/4" from the front
and back edge of the Threshold.
6.
Using the adhesive (not included) make a zig-zag line from the front adhesive
line to the back adhesive line and run this zig-zag line the entire length of the two
lines.
7.
Follow the adhesive (not included) label directions for proper dry time before
applying the Threshold. Always keep adhesives away from children.
8.
Place the Threshold between the two pencil lines and carefully press into place.
9.
Lower the Garage door so it may act as a clamp holding the Threshold until the
adhesive drys. Make sure the Threshold is still alligned between the pencil lines.
10.
Wipe up any excess adhesive with warm water before it has a chance to harden.
Damaged products can fail. Do not use this Threshold if it is damaged in any
way. Have any problem corrected before use.
1.
periodically inspect the general condition of the Garage Door Threshold. Check
cracks or any abnormal condition that may affect its safe operation.
2.
periodically clean with sponge mop. This will keep dirt from wearing down the
surface reducing the possibility of moisture or insects entering your garage.
please read the FolloWing careFully
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy DIAGRAM IN THIS MANUAL
AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy REPRESENTATION OR
WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT,
OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/
OR DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN By
CERTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUyER. THE BUyER ASSUMES ALL RISK AND LIABILITy
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
1.
One piece Garage Threshold: Model 96326 - 8' x 4"
2.
One piece Garage Threshold: Model 96327 - 10' x 4"
3.
One piece Garage Threshold: Model 96328 - 16' x 4"
Each package contains one piece of that model number.
NOTE:
96526/27/28
For technical questions, please call 1-800-444-3353.
Maintenance and serVicing
cleaning and Maintenance
parts list
Page 4
Advertisement
