Table of Contents
Advertisement
Menu functions
the network. You need these settings to use the web
browser or send MMS messages or e-mails.
Your phone is suited for connecting to the network
by default. If you change the settings without first
checking with your service provider, the web
browser, MMS, and e-mail features may not work
properly.
Creating a profile
1. Press <New>, or press <Options> and select
New.
2. Specify profile parameters:
•
Set name: enter a profile name.
•
Access name: edit the access point name
used for the address of the GPRS network
gateway.
•
Auth type: choose the type of
authentication used.
•
User ID: enter the user ID.
•
Password: enter the user password.
•
Protocol: select the protocol from WAP,
HTTP, and Other.
•
Home URL: enter the URL address of the
page to be used as your homepage.
•
Gateway address: (WAP only) enter the
gateway address of the proxy server.
•
Proxy address/Port: (HTTP only) set the
proxy server address and port.
76
•
Secure connection: (WAP only) turn the
secure mode on or off.
•
Linger time (sec.): set a time period after
which the network is disconnected if there
has been no new data traffic in that time.
•
Advanced settings: provide you with the
following options:
Static IP: specify if you want to manually
enter an IP address; see the Local phone
IP option. If you want the IP address to be
automatically assigned by the server, remove
the check mark.
Local phone IP: enter the IP address
obtained from the network operator, if you
checked the Static IP option.
Static DNS: specify if you want to manually
enter the Domain Name Server (DNS)
address; see the Server 1/Server 2 option.
If you want the address to be automatically
assigned by the server, remove the check
mark.
Server 1/Server 2: enter the Domain Name
Server (DNS) addresses.
Traffic class: select the traffic class.
3. Press <Save> to save the profile.
Advertisement
Table of Contents
