How To Check, Change And Cancel A Delayed Recording - Sharp VC-M313HM Operation Manual

BASIC OPERATION
HOW TO CHECK, CHANGE AND CANCEL A DELAYED
RECORDING
Before you start!
• If appears on the VCR display, press
CHECKING A RECORDING
1.
STOP
Press to switch on the VCR.
2.
MENU
Press .
3.
Press [ /
confirm.
• All the delayed recordings in the VCR's memory
will be shown.
4.
If the settings are correct press
• If you wish to change or cancel any settings,
follow the procedures below.
CHANGING A RECORDING
1.
Follow steps 1 to 3 of
RECORDING
2.
To change a delayed recording, press
[ / ] to highlight the recording, then press
SET
to select.
3.
[ / ]
Press
changed and correct it by using the [
or the NUMBER BUTTONS
4.
When all corrections are complete press
confirm, then press
CANCELLING A RECORDING
1.
Follow steps 1 to 3 of
RECORDING
2.
To cancel a delayed recording, press
[ / ] to highlight the recording to be
cancelled, then press
3.
MENU
Press to exit.
NOTE:
• If there are some programmes to be recorded, do not forget to press
button to return the VCR to TIMER STANDBY mode.
If problems persist contact the SHARP Helpline on tel: 0990-274277
]to select TIMER . Press
MENU
CHECKING A
.
to highlight the setting to be
.
MENU to exit.
CHECKING A
.
CLEAR
.
TIMER ON/OFF
MENU SCREEN
T I ME R
MOD E
SET to
S E T U P
: S E L E C T
to exit.
S E T : E N T E R
DA T E
2 1 / 0 6
- - / - -
- - / - -
- - / - -
/ ]
SET to
DA T E
2 1 / 0 6
- - / - -
- - / - -
- - / - -
17
to remove the symbol.
ME NU : E X I T
P R S T AR T S T OP
0 2 1 2 : 0 0 1 3 : 0 0 S P
- - - : - - - : - -
- - - : - - - : - -
- - - : - - - : - -
P R S T AR T S T OP
0 2 1 2 : 0 0 1 3 : 0 0 S P
- - - : - - - : - -
- - - : - - - : - -
- - - : - - - : - -
TIMER ON/OFF
1 / 2
- -
- -
- -
1 / 2
- -
- -
- -