Sharp VC-M313HM Operation Manual page 17

BASIC OPERATION
HOW TO USE
7.
If your VCR has long play facility and you wish
to change the
[ / ]
the to highlight SP. Press [
to select standard play (SP) or long play (LP)
as required.
8.
Press SET to confirm the programme. The
VIDEOPLUS+ menu will reappear. If you wish
to enter further VIDEOPLUS+ recordings
repeat this procedure.
9.
When you have completed entering timer
settings, press MENU
from the TV screen.
10.
Ensure that the tape on which you wish to
record is inserted into the VCR, then press
TIMER ON/OFF once to place the VCR in
TIMER STANDBY mode.
the display.
NOTES:
• You may also access the VIDEOPLUS+ menu by the following procedure:
i.
Press MENU
ii.
The VIDEOPLUS+ option will be highlighted. Press
Continue from step 2 above.
• If flashes a video tape has not been inserted into the VCR.
• If the video tape is ejected when the VCR tries to record the record protection tab has
been removed.
• During recording, press
recordings to be made, the VCR will return to TIMER STANDBY.
If problems persist contact the SHARP Helpline on tel: 0990-274277
RECORDING SPEED
to remove the menu
will be shown on
.
STOP (
TO MAKE A RECORDING
, use
/ ]
DA T E
2 1 / 0 6
- - / - -
- - / - -
- - / - -
T A P E
S E T
P L U S COD E
ONC E
SET
) to cancel the recording. If there are further
14
P R S T AR T S T OP
0 2 1 2 : 0 0 1 3 : 0 0
- - - : - - - : - -
- - - : - - - : - -
- - - : - - - : - -
S P E E D :S P / L P
: S E L E C T : CHANGE
: E N T E R ME NU : E X I T
. -
WE E K L Y
to confirm.
1 / 2
S P
- -
- -
- -
DA I L Y