Table of Contents
Advertisement
2.7.3 Remote Control
All of your plasma display's selection and adjustment
16
possibilities are able to be carried out with the remote
control. Menus on the display are available for your
support. You will find the description of the menus
starting on page 25 in this manual.
• Remote control range
The remote control only functions properly when
there is no obstruction between the operation and
the infrared sensor on the front side of the plasma
display.
It can happen that the display is not able to receive
the remote control signals or their function range is
severely inhibited, although there is no obstruction
in the way. The reason for this is the infrared radiation
which the display itself emits. Come closer to the
display with the remote control.
IR Remote Sensor
C A U T I O N
!
30
The remote control range is reduced when the batteries
become weaker. In this case, please replace the
batteries.
• Installing the batteries
Please push aside the battery compartment cover
with a downward motion. The cover unlocks and
is able to be removed.
Insert the enclosed batteries. While doing so, pay
attention to the proper polarity of the batteries.
This is indicated in the battery compartment.
In order to close the battery compartment, put
the cover back on again, and carefully press it
shut. Your remote control is now ready for
operation.
-
+
-
+
Reference for disposal of batteries:
Exhausted batteries do not belong in household waste.
They must be deposited at a collection site for old
batteries (e.g. battery collection box at dealer) or
turned in with hazardous waste.
Advertisement
Table of Contents
