Connecting; Power Supply - Medion Notebook Manual

Connecting

Pay attention to the following information in order to connect your notebook properly:

Power Supply

•
Do not open the power adapter housing. When the housing is open there is a
danger of severe electric shock. It contains no user-serviceable parts.
•
The AC outlet must be in the vicinity of the notebook and within easy reach of the
power cables. DO NOT stretch the power cables to reach an AC outlet.
•
In order to disconnect your notebook from the power source or change to battery
operation, remove the power cord from the notebook socket.
•
Only use the notebook with a power adapter operating at AC 110-240V~/50-60Hz.
Please refer to the rating label on the back of the notebook for details on power
consumption.
•
Only use the supplied power cord and adapter.
•
If you are using an extension cord, ensure that the cord meets your local safety
requirements. If in doubt, ask an electrician. Never use frayed or worn extension
cords.
•
To provide additional protection against electric shock, power surges, lightning
strikes, or other electrical damage to your notebook, we recommend the use of a
surge protector.
•
When detaching the power adapter from the power source, first remove the cord
and then the connector from the notebook. A reverse sequence could damage the
power adapter or your notebook. Always hold the cord firmly when removing it.
Never pull on the power cord.
- 6 -
Warnings