Listen to voice mail
If your voice mail number is preset by your
service provider, you can press and hold [1] to
access your voice mail.
If the voice mail number is not preset or if you
need to change the voice mail number,
1. In Standby mode, press [
Call mlbox. → <Options> → Change
number.
2. Enter the voice mail number provided by
your service provider and press <OK>.
You can now access your voice mail from
Standby mode by pressing and holding [1].
Email messages
Before you send or receive email messages,
you must create a mailbox.
Create a mailbox
1. In Standby mode, press <Messaging> →
] → Tools →
2. Press <Yes> or press <Options> → New
3. Press <Start> to start the mailbox setup
The new mailbox will automatically appear in
Messaging. To change the current mailbox,
return to email settings and switch the "Mailbox
in use" to another mailbox.
<Options> → Settings → E-mail or Sync
e-mail → Mailboxes.
mailbox.
wizard and follow the on-screen
instructions.
If you use the POP3 protocol, the mailbox
will not update automatically when you are
online. You must disconnect and then
reconnect to view new messages.
29