Polaroid T1032 User Manual page 29

Sharpness
This sets the sharpness of the image that will be captured.
* Hard / Normal / Soft
Saturation
This sets the saturation of the image that will be captured.
* High / Normal / Low
White Balance
This sets the white balance for a variety of lighting conditions and adjusts the images
overall color according to the surrounding light conditions. Use this function if image
color appears unnatural.
* [ Blank ] Auto (for most photographic scenes)
* [ ] Incandescent
* [ ] Fluorescent 1
* [ ] Fluorescent 2
* [ ] Daylight
* [ ] Cloudy
* [ ] Manual
Manual WB
This manually sets the white balance and stores it. Use this feature if one of the above
pre-selected white balance lighting settings does not produce overall good image quality for
the lighting used in your image.
Place a white paper in the middle of the scene, with all lights that will be used in the photo
turned on. Zoom in on the paper, so it almost fills the frame. Then, select [Execute] from
the Manual WB menu. This establishes for the camera exactly what white should look like
under the current lighting conditions, and it will adjust its white balance accordingly.
* Cancel / Execute
ISO
This sets the sensitivity for capturing images. When the sensitivity is raised (and the ISO figure
is increased), images taken under low lighting or darker areas of the image will be seen, but
the image may be more pixelated/grainier overall. As a "rule of thumb" the higher the ISO
value the more grain in the image.
* [Blank] Auto
* [ ] ISO 80
* [ ] ISO 100
* [ ] ISO 200
* [ ] ISO 400
* [ ] ISO 800
* [ ] ISO 1000
Metering
This sets the metering method for calculating the exposure.
* Center: Averages the light metered from the entire frame, but gives greater weight to the
subject matter at the center.
* Multi: The entire area of the screen is measured, and the exposure is calculated.
* Spot: A very small portion of the center of the screen is measured to calculate the correct exposure.
EN-28