Number Plate Light; Side Turn Signal Lights - Vauxhall Antara 2014 Owner's Manual

164 Vehicle care

Side turn signal lights

1. Using a suitable screwdriver, pry
lamp assembly away from wing.
2. Rotate bulb holder anticlockwise.
3. Remove bulb from lamp assembly
by pulling bulb straight out of bulb
holder.
4. Insert new bulb into bulb holder by
pressing it in and rotating the bulb
holder clockwise.
5. Push lamp assembly back into
aperture.
Centre high-mounted
brake light
Have bulbs replaced by a workshop.

Number plate light

1. Remove 4 screws (arrowed) and
remove lamp covers.
2. Remove bulb holder from lamp
assembly by rotating it
anticlockwise.
3. Pull bulb straight out of bulb
holder.
4. Insert new bulb.
5. Reinstall bulb holder into lamp
assembly, rotate bulb holder
clockwise and ensure it is secure.
6. Replace lamp covers using the
4 screws removed earlier.
Interior lights
Front reading lights
1. Using a suitable screwdriver, pry
lamp lens away from roof lining.
2. Remove bulb.
3. Insert new bulb.
4. Reinstall lamp lens in roof lining.