Wall - Mounting The Unit - Polaris NRX-1 User Manual

8733 NRX-1_User Guide.qxd
is at the back panel of the base cabinet and has a removable plastic cover.
Only equipment complying with ACA standards and intended for connection to the
telephone network should be connected to this port marked MODEM.
2.14 Hearing – aid compatibility
The handset receiver is hearing aid compatible.
3. WALL – MOUNTING THE UNIT
●
The NRX-1 can be wall mounted using the wall mount bracket installed on the
bottom of the unit.
●
Dismount the wall mount bracket from the unit
●
Place the wall mount bracket on the required position on the wall
●
Drill two holes on the wall according to the distance as marked by two
mounting holes.
●
Install the two screws supplied with the unit in the wall.
●
Re-install the wall mount bracket to the bottom cabinet for the wall mount
position.
●
Position the wall mount slots on the bracket of the unit over the two screws on the
wall. Pull down and lock into place.
●
Beneath the earpiece section of the cradle you will find a small tab. Pull this up to
form the hook for the handset.
●
When you are on the telephone, you sometimes need to put the handset down for
a moment. There is a special hook at the back (top) of the unit so that you can hang
the handset on the unit, when it is wall – mounted, without terminating the call.
8/12/2003 2:01 PM
NRX-1 - The telephone for the corporate user
7
Page 7