Lan Configuration - Gigaset SE555 WLAN dsl First Steps

Table of Contents

Configuring Advanced Settings

LAN configuration

You can use the LAN configuration to define an

dsl and configure the DHCP server.

Select Advanced Settings – Local Network.

Defining the private IP address for the Gigaset SE555 WLAN dsl

On this screen you can change the device's

192.168.2.1. This is the

address under which the device can be reached in the local network. It can be freely

assigned from the block of available addresses. The IP address under which the Gigaset

SE555 WLAN dsl can be reached from outside is assigned by the Internet service

provider.

If you want to assign a different IP address to the Gigaset SE555 WLAN dsl, enter it

in the fields next to IP address.

Adjust the Subnet mask if necessary.

We recommend that you use an address from a block that is reserved for private use.

This address block is 192.168.1.1–192.168.255.254.

Note:

New settings can only be made after the Gigaset SE555 WLAN dsl has been

rebooted. If necessary, reconfigure the IP address on your PC (including one that

is statically assigned) so that it matches the new configuration.

Private IP address

of the Gigaset SE555 WLAN dsl. This is the

IP address

for the Gigaset SE555 WLAN

address. The preset IP address is

Table of Contents

Show Quick Links

Table of Contents