Advertisement
Quick Links
Batter
Batter
Batter y Charger/T
Batter
Batter
ASSEMBLY AND OPERATING INSTRUCTIONS
VISIT OUR WEB SITE AT HTTP://WWW.HARBORFREIGHT.COM
TO HELP PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
©
Copyright
or any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
y Charger/T
y Charger/T
y Charger/T ester
y Charger/T
12 V
12 V
12 V olt
12 V
12 V
3491 MISSION OAKS BLVD., CAMARILLO, CA 93011
AND INSTRUCTIONS BEFORE USE.
2005 by Harbor Freight Tools
ester
ester
ester
ester
olt
olt
olt
olt
94088
®
®
. All rights reserved. No portion of this manual
Advertisement
Summary of Contents for U.S. General 94088
- Page 1 Copyright 2005 by Harbor Freight Tools or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353. y Charger/T y Charger/T...
-
Page 2: Important Safeguards
Model: 94088. Do not expose charger to rain or snow. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. - Page 3 (h) Use this charger for charging LEAD-ACID batteries only. It is not intended to supply power to a low voltage electrical system other than in an automotive application. Do not use battery charger for charging dry-cell batteries that are commonly used with home appliances. These batteries may burst and cause injury to persons and damage to property.
- Page 4 (as in most vehicles), see (e). If the positive post is grounded to the chassis, see (f). (e) For negative-grounded vehicle, connect POSITIVE (RED) clip from battery charger to POSITIVE (POS, P, +) ungrounded post of battery. Connect NEGATIVE (BLACK) clip to vehicle chassis or engine block away from battery.
- Page 5 (g) A marine (boat) battery must be removed and charged on shore. To charge it on board requires equipment specially designed for marine use. SAVE THESE INSTRUCTIONS SKU 94088 For technical questions, please call 1-800-444-3353. Page 5...
- Page 6 Specific Safety Rules for the Battery Charger Maintain labels and nameplates on the Battery Charger. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Always wear safety impact eye goggles and heavy work gloves when using the Battery Charger.
- Page 7 ASSEMBLY INSTRUCTIONS When unpacking, check to make sure that the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
-
Page 8: Maintenance Instructions
If this happens, immediately switch off the charger, unplug it, and switch the connections. When the battery is fully charged, the Battery Charger will automatically shut down, and the green LED will remain lit. Optionally, only with the battery removed from the vehicle, the Battery Charger can be left on while connected to the battery.
Need help?
Do you have a question about the 94088 and is the answer not in the manual?
Questions and answers