1
Caution
●
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
●
Do not mix old and new batteries.
●
Do not mix different battery types (such as alkaline and manganese batteries).
●
Do not use rechargeable (Ni-Cd) batteries.
●
Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
Release the mains lead from the clamper and use to bundle the cables.
Rear of the TV
Anti-scratch sheet
●
You can remove this sheet as necessary.
Remove the clamper from the TV to
remove this sheet.
●
Do not bundle the Satellite cable and mains lead together (could cause distorted image).
●
Fix cables with clampers as necessary.
●
When using the optional accessory, follow the option's assembly manual to fix cables.
Installing / removing remote's batteries
Pull
open
Hook
Using the clamper
2
Note the correct
polarity (+ or -)
■
Attach the clamper
hole
Insert the clamper
in a hole
■
Bundle the cables
Set the
hooks
tip in the
hooks
Close
To remove from the TV:
snaps
Keep
pushing both
side snaps
To loosen:
Keep
knob
pushing
the knob
7