Accessories / Options
●
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
●
Do not place any objects or hands within the full rotation range.
●
TX-L32V10E
a: 359 mm / b: 230 mm
●
TX-L37V10E
a: 399 mm / b: 296 mm
Identifying Controls
TV
SD Card slot
(p. 58)
Headphones
jack
(p. 71)
8
Adjust the panel to your desired angle
SD CARD
Power LED
●
●
C.A.T.S. (Contrast Automatic Tracking System) sensor
●
Senses brightness to adjust picture quality when "Eco Mode" in the Picture Menu
is set to "On" (p. 26)
Remote control signal receiver
●
Do not place any objects between the TV remote control signal receiver
and remote control.
Set the mark at the centre as illustrated, to
ensure full degree rotation in either direction.
b
15°
(View from the top)
Recording LED
●
Standby for Direct TV Recording: orange
Standby: red
On: green
When using the remote control, indicates the TV has received a command.
15°
a
Mains power On / Off switch
●
Switch On to turn on the TV or turn the TV
to standby mode by the remote control
Function select
●
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) /
Bass / Treble / Balance / Auto Setup
(p. 32, 34, 35)
Increases or decreases the channel
position by one. When a function is
already displayed, press to increase or
decrease the selected function. When
in Standby mode, switches TV On.
Changes the input mode