Power tools create sparks which may ignite the dust or fumes. For technical questions, please call 1-800-444-3353 SKU 94344 For Use With Harbor Freight Tools’ Model 94345 Concrete Vibrator Head/Hose (Not Included) 6.5 HP Briggs & Stratton®Recoil Start Unleaded Gasoline Powered Engine Approval: 2006 CA Emissions Approval 2006 E.P.A.
Page 3
Maintain tools with care. Properly maintained tools and equipment are less likely to bind and are easier to control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired. For technical questions, please call 1-800-444-3353 SKU 94344 PERSONAL SAFETY TOOL USE AND CARE PAGE 3...
Concrete Vibrator with any other type of Head and Hose. Maintain labels and nameplates on the Concrete Vibrator. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Industrial applications must follow OSHA guidelines.
Page 5
FIRE AND EXPLOSION PRECAUTIONS Gasoline fuel and fumes are flammable, and potentially explosive. Use proper fuel storage and handling procedures. Always have multiple ABC class fire extinguishers nearby. For technical questions, please call 1-800-444-3353 SKU 94344 PAGE 5...
Vibrator and Engine. If swallowed, seek medical treatment immediately. Do not induce vomiting if fuel is swallowed. For skin contact, immediately wash with soap and water. For eye contact, immediately flush eyes with clean water. For technical questions, please call 1-800-444-3353 SKU 94344 CHEMICAL PRECAUTIONS PAGE 6...
When unpacking, check to make sure all the parts shown on the Parts List on page 13 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Page 8
To Attach The Head And Flexible Hose To The Concrete Vibrator: NOTE: This Concrete Vibrator is designed for use only with the model 94345 Concrete Vibrator Head and Hose (available from Harbor Freight Tools). Do not attempt to use the Concrete Vibrator with any other type of Head and Hose.
Page 9
“MAXIMUM” indicator on the Oil Dipstick. Do not exceed the “MAXIMUM” indicator mark on the Oil Dipstick. When finished adding engine oil, carefully screw the Oil Dipstick back into the Dipstick Hole. For technical questions, please call 1-800-444-3353 SKU 94344 PAGE 9...
IMPORTANT: Never allow concrete to enter the Vibrator Head assembly, as this could damage the bearings inside the Head. (See Figure C.) FIGURE C FIGURE C For technical questions, please call 1-800-444-3353 SKU 94344 VIBRATOR HEAD VIBRATOR HEAD CASING CASING...
Page 11
TROUBLESHOOTING - VIBRATOR HEAD AND FLEXIBLE HOSE Problem Engine runs, but Vibrator Head will not vibrate. For technical questions, please call 1-800-444-3353 SKU 94344 Possible Cause Excessive dried concrete or debris on Vibrator Head. Excessive kinks in Flexible Hose. Cylindrical Plug and/or Cylindrical Connector not properly connected to Coupler on Concrete Vibrator unit.
THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. For technical questions, please call 1-800-444-3353 SKU 94344 PAGE 12...
Shaft Circlip Coupler Clutch Block Shaft Connector Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-800-444-3353 SKU 94344 Part Description Qty. Flexible Washer Washer Bolt...
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.