Set Dvb Channel Manually [Manual Tuning - Panasonic Viera TX-L32X5E Operating Instructions Manual

Set Analogue channel manually [Analogue Manual Tuning]
Set Analogue channel manually after Automatic Channel Search.
Example: Antenna
Analogue Manual Tuning
Searching channels.
Start Frequency (MHz)
Scan up

Set DVB channel manually [Manual Tuning]

Normally use [Automatic Channel Search] or [Scan] to retune DVB channels.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
All channels found will be added to the Channel List.
DVB-C :
1
Enter the frequency
DVB-C Manual Tuning
DVB-C Manual Tuning
Scan
Frequency (KHz)
Modulation Auto
Symbol Rate(Ksym/s)
Signal Level
Signal Condition
DVB-T :
1
Adjust frequency for each channel
DVB-T Manual Tuning
DVB-T Manual Tuning
Scan
Channel 2
Signal Level
Signal Condition
List favourite DVB channels [Favourites Edit], Skip unwanted channels [Skip]
Create your favourite channel lists from various broadcasters.
1
Select a channel to list (
Favourites Edit
1 Analogue
2 Analogue
3 Digital
4 Digital
Skip unwanted channels
You can hide unwanted channels.
The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels.
Select a channel and reveal / hide
Skip
1 Analogue
2 Analogue
3 Digital
4 Digital
To change page (page up)
(red)
34
1
Enter the frequency to start scanning
48.00
Scan down
2
Select the scanning method
[Scan up]: Scans ascendingly from the entered frequency to higher
[Scan down]: Scans descendingly from the entered frequency to lower
Cable
0%
306000
6875
0
0
Antenna
0%
0
0
: Encrypted channel)
select
[Add] / [Remove]
[Skip]
To change page (page down)
(green)
select
access
frequencies
frequencies
select
access
select
access
To select
(yellow)
2
Search
2
Search
: [Add]
: [Remove]
: Hide (skip)
: Reveal
To exit
(blue)