Table of Contents
Advertisement
Relief Recording
When the recording drive is "DVD" and there is not
enough remaining blank space, recording automatically
switches to the "HDD". If there is no disc in the tray or
the disc cannot be recorded on or when timer recording
starts while copying, the recording drive will be altered to
the HDD.
The Direct Navigator shows which programmes were
relief-recorded ("
" is displayed.) (
If the time remaining on the HDD is insufficient, as
much of the programme as possible will be recorded
onto the HDD.
Auto Renewal Recording
[HDD]
If you record a programme onto HDD repeatedly
everyday or every week using timer recording, the unit
will record the new programme over the old one.
This function can be used only when weekly
recording or daily recording is selected.
, to select the programme,
then
OK
, to select "RENEW" column.
, to select "ON", then
Timer
Remain
HDD
30:24 SP
Recording
HDD
Name
Date
Start
Stop
DVD
1 BBC
SUN
22:00
22:30
HDD
Notes
If a programme set for Auto Renewal Recording is protected or
while play back is taking place from the HDD, or while copying,
the programme will not be overwritten. Instead the programme
set for recording will be saved as a separate programme, and this
programme will be the one to be overwritten when the next Auto
Renewal Recording takes place.
Playlists made from programmes that were set for Auto Renewal
Recording are deleted along with auto renewal.
When there is not enough space on the HDD, the programme
may not be recorded completely.
34).
OK
DVD
1:58 SP
FRI 10/10/08 12:54:00
RENEW
Mode
SP
ON
Programme Name
Making timer recordings on the television
(e.g., of digital broadcasts)
[HDD]
To make a timer recording with your television, connect
to a television with a Q Link function (
use for setting timer recordings using a fully wired 21-pin
Scart cable (
10,11).
Make timer programming on the
TV.
DVD
¦
to turn the unit off.
– The start and end of recording is controlled
by TV.
– The titles are recorded to the HDD.
Tips
To stop recording
Press [STOP].
Notes
When this unit is in EXT LINK standby ("EXT-L" on the unit's
display lights), recording from TV does not start.
Programmes are recorded as one title on this unit when the end
time of the earlier timer recording and the start time of the later
timer recording are close to each other.
To divide the titles, go to "Divide Title" (
Notes on timer recording
When a timer recording is set, DVDs that were recorded using
a different TV system cannot be played unless the TV system is
changed in the Setup menu (
completed or has been cancelled.
Timer recordings are activated regardless of whether the unit is
turned on/off.
Timer recordings begin when the set time is reached even when
playing.
Timer recordings do not begin while editing or copying in normal
speed mode (
52).
If the unit is turned on when timer recording begins, it
remains turned on after recording fi nishes. It does not turn off
automatically. You can turn the unit off during timer recording.
If the unit is not put in the timer recording standby mode at the
last 10 minutes before the programmed timer recording starting
time, the "" fl ashes on the unit's display.
When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
Programme
Programme
Recorded
Recorded
42) that you can
45).
71) or the timer recording has
Not recorded
RQT9199
33
Advertisement
Table of Contents
