Mp3 Player; Playing A Mp3 - Pioneer DEH-P7450MP Operation Manual

Section

MP3 Player

05

Playing a MP3

These are the basic steps necessary to play a
MP3 with your built-in CD player. More
advanced MP3 operation is explained starting
on page 19.
1
FOLDER NUMBER
Shows the folder number currently playing.
2
TRACK NUMBER
Shows the track (file) currently playing.
3
indicator
PLAY TIME
Shows the elapsed playing time of the cur-
rent track (file).
1 Press
OPEN
CD loading slot appears.
• After inserting a CD-ROM, press
select the built-in CD player.
2 Insert a CD-ROM into the CD loading slot.
Playback will automatically start.
button
EJECT
• You can eject a CD-ROM by pressing
• To avoid a mulfunction, make sure that no
metal object comes into contact with the termi-
nals when the front panel is open.
3 After a CD-ROM has been inserted, close
the front panel.
4 Use
VOLUME
Rotate to increase or decrease the volume.
18
En
1 2
3
indicator
indicator
to open the front panel.
SOURCE
CD loading slot
to adjust the sound level.
5 Press 5 or ∞ to select a folder.
• You can not select a folder that does not have
an MP3 file recorded in it.
• Press ∞ for 2 seconds or longer to return to
folder 01 (ROOT).
6 To perform fast forward or reverse, press
and hold 2 or 3.
• This is fast forward and reverse operation only
for the file being played. This operation is can-
celed when the previous or next file is reached.
7 To skip back or forward to another track,
press 2 or 3.
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous track.
Notes
• The built-in CD player can play back an MP3
file recorded on CD-ROM (Please refer to
page 42 for files that can be played back.)
• Do not insert anything other than a CD into
the CD loading slot.
• There is sometimes a delay between starting
up playback and the sound being issued. This
to
is particularly the case when playing back
multi-session and many folders. When being
read in,
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT
disc for damage before inserting the disc
again.
• Playback is carried out in order of file number.
Folders are skipped if they contain no files. (If
folder 01 (ROOT) contains no files, playback
commences with folder 02.)
• When playing back files recorded as VBR
.
EJECT
(Variable Bit Rate) files, the play time will not
be correctly displayed if fast-forward or
reverse operations are used.
• If selected disc contains no files that can be
played back,
• There is no sound on fast-forward or reverse.
• If the built-in CD player does not operate prop-
erly, an error message such as
be displayed. Refer to Understanding built-in
CD player error messages on page 41.
is displayed.
Format Read
to eject the disc, and check the
is displayed.
No Audio
may
ERROR-11