■
Features available
(Using VIERA Link Menu)
Speaker control
You can control the theatre speaker with this TV remote control (point the remote control at the TV's
signal receiver).
●
If you cannot operate, check the settings and the equipment
"Summary of Q-Link and VIERA Link features" (p. 46 and p. 47), "Preparations" (p. 49)
Access and control the speaker volume
INPUT
TV
AV
ASPECT
MENU
N
DIRECT TV REC
EXIT
OPTION
RETURN
TEXT
STTL INDEX HOLD
PROGRAMME
TV
Note
●
These functions may not work properly depending on the connected equipment.
●
Image or sound may not be available for the first few seconds when Input mode is switched.
●
Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or Amplifier.
Read the manual of the equipment.
●
"HDAVI Control 4" is the newest standard (current as of December, 2008) for HDAVI Control compatible
equipment. This standard is compatible with conventional HDAVI equipment.
●
To confirm this TV's version of HDAVI Control
Speaker Selection
Display "VIERA Link Menu"
1
Select "Speaker Selection"
2
VIERA Link Menu
Pause Live TV
Direct TV Rec
Start
VIERA Link Control
Speaker Selection
Home Cinema
Recorder
Speaker Selection
Home Cinema
Set to "Home Cinema" or "TV"
3
■
Home Cinema
Player theatre, Blu-ray Disc theatre or Amplifier will be
automatically turned on if it is in Standby mode and the sound is
from theatre speakers connected to the equipment.
●
Volume up / down
(
Volume slide bar will be displayed when
adjusting the volume of the equipment.
●
Mute
●
The sound of TV speakers is mute.
●
When the equipment is turned off, TV speakers will be active.
■
TV
TV speakers are active.
Note
●
To enjoy the sound from the DIGA Recorder in multi-channel sound,
connect an HDMI cable from the DIGA Recorder to the Amplifier (p. 47).
"System Information" (p. 29)
select
set
)
53