Switching Vocals On Or Off For Karaoke Discs - Panasonic DVD-LV70 Operating Instructions Manual

Portable dvd/video cd/cd player
Hide thumbs Also See for DVD-LV70:
Table of Contents

Advertisement

Switching vocals ON
or OFF for karaoke
discs
Remote control only
DVD VCD
(Karaoke discs)
During play
1
Press [AUDIO].
(DVD)
(Video CD)
2
Use the cursor jockey [2, 1]
/[3, 4]
, or press
(DVD)
(Video CD)
[AUDIO]
to change
(Video CD only)
the audio mode.
DVD karaoke disc (Solo)
[---]
: Vocal OFF (for karaoke)
[ON] : Vocal ON
DVD karaoke disc (Duet)
[---]
: Vocal OFF (for karaoke)
[1i2] : Vocal 1 and 2 ON
[V1] : Vocal 1 only ON (for duet)
[V2] : Vocal 2 only ON (for duet)
VCD karaoke disc
[LR] : Vocals (Vocals seem to come from
the right)
[L]
: No Vocals (for karaoke)
[R]
: Vocals (Vocals seem to come from
both left and right)
∫ To clear the on-screen display
Press [ENTER].
The on-screen icons will disappear auto-
matically if nothing is selected.
Note
You cannot connect a microphone directly
to this unit. Connect the unit to an amplifier
(➡ pages 36–38) that has a microphone
jack when you want to enjoy karaoke and
20
sing along.
RQT5900
Changing the monitor settings
DVD VCD
While stopped or playing
Press [MONITOR] to change the
monitor settings.
The setting mode changes each time you
press the button.
[)A Changing the size of the picture
l
l
MONITOR
MODE
l
l
;
l
B Adjusting the brightness
l
MULTI
l
MONITOR
BRT
l
l
;
l
C Adjusting colour intensity
l
l
MONITOR
COLOUR
l
l
;
{----The setting mode is cleared.
Select the indicator for the setting you want
to change then follow the procedures on
page 21.
Turn the indicator off after you complete the
setting.
≥Picture size returns to "1 (Normal)" if the
unit is turned off or [IN/OUT] (➡ page 40)
is pressed.
≥Brightness and colour intensity settings
are saved even if the unit is turned off un-
less the settings were made while the
"LINE-IN" mode is on.
Note
These changes are effective only for this
unit's LCD.
Make changes to the television's settings if
you have connected one.
ª
Changing the size of the picture
A
Use the cursor jockey [3, 4] to change the picture mode.
The mode is shown on the unit's display as follows.
1 (Normal)()2 (Full)()3 (Zoom)
^------------)4 (Off)(------------J
∫ The picture mode and size
The picture shown on the LCD depends on the display mode and the size recorded on the
disc.
Mode
1
2
(Normal)
(Full)
Software
Wide-
Full screen
Full screen
screen
Te quiero
Te quiero
Regular
Screen with black
The "Mode 1"
(4:3)
bands on the right
screen is horizontally
and left
enlarged.
Te quiero
Te quiero
Regular
The picture is
The "Mode 1"
(4:3),
surrounded by a
screen is horizontally
Letterbox
black frame.
enlarged.
Te quiero
Te quiero
Te quiero
≥If you are not using the LCD on this unit, select "4 (Off)" to conserve power.
≥The LCD is turned off if you close the unit.
≥Horizontal lines may appear in the picture when the mode is switched to "3 (Zoom)", but this is not an
indication of malfunction.
ª
B
Adjusting the brightness
ª
Use the cursor jockey [3, 4] to ad-
just the brightness.
Use the cursor jockey [3, 4] to ad-
j5: dark () 5: light
just the colour shade.
j5: dark () 5: light
Power consumption increases with the
level of brightness.
3
4
(Zoom)
(Off)
Top and bottom
edges are cut off.
Off
Te quiero
Top and bottom edges
of the "Mode 2"
screen are cut off.
Off
Full screen
Off
Te quiero
Adjusting colour
C
intensity
21
RQT5900

Advertisement

Table of Contents
loading

Table of Contents