Table of Contents
Advertisement
Direct Play
During playback, you can access specific recordings or scenes
through direct entry of the numbered buttons.
Play starts from the selected title or chapter.
[BD-V] [AVCHD]
e.g.,
5: [0]
[0]
[5]
15: [0]
[1]
[5]
≥ While stopped (the image on the right is
displayed on the screen), the title is
designated. While playing, the chapter is
designated.
Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
Each press shows the next frame.
≥ Press and hold to change in forward or backward
succession.
≥ Press [1] (PLAY) to revert to normal playback speed.
≥ [BD-V] [AVCHD] : Forward direction [1] (;1) only.
Screen Aspect
When black bars are shown at the top, bottom, left, and right
sides of the screen, you can enlarge the image to fill the
screen.
1 Press [OPTION].
2 Press [3, 4] to select "To Others" and press [OK].
3 Press [3, 4] to select "Screen Aspect" and press [OK].
4 Press [2, 1] to select "Side cut" or "Zoom".
! Normal:
Normal output
! Side cut: The black bars on the right and left sides of
the 16:9 image disappear and the image is
enlarged. Please note that the right and left
sides of the image are cut off when the
black bar is not displayed.
! Zoom:
The black bars on the top and bottom sides
of the 4:3 image disappear and the image is
enlarged. Please note that the top and
bottom sides of the image are cut off when
the black bar is not displayed.
≥ Please note that the top, bottom and sides of the image will
be cut off in images with no black bars.
≥ Screen aspect will return to "Normal" in the following
instances:
jThe drive is switched
jThe unit is turned on/off
≥ [BD-V] [DVD-V]: "Side cut" does not have any effect.
≥ When "TV Aspect" (
41) is set to "4:3 Pan & Scan" or "4:3
Letterbox", the "Zoom" effect is disabled.
[DVD-V]
e.g.,
5: [0]
[5]
15: [1]
[5]
Status messages
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
information displayed will change.
≥ It is also possible to display with the following procedures:
1 Press [OPTION].
2 Select "Status" with [3, 4], and press [OK].
Type of disc
e.g., [BD-V]
T: Title
No display
C: Chapter
PL: Playlist
T1
C1
Current position
Depending on the kind of media or the playback status, this
display may not appear.
Changing audio
≥ It is also possible to display with the following procedures:
1 Press [OPTION].
2 Select "To Others" with [3, 4], and press [OK].
3 Select "Audio" with [3, 4], and press [OK].
[BD-V] [DVD-V]
e.g., [DVD-V]
Soundtrack
English is selected.
You can change the audio channel number each time you
press [AUDIO] or [3, 4]. This allows you to change the
soundtrack language (
26, "Soundtrack"), etc.
[DVD-VR] [DivX] [MPEG2]
AudioLR>AudioL>Audio R
^---------------------------------}
You can change soundtracks each time you press [AUDIO].
Manual Skip
≥ Each time you press, play restarts approximately 1 minute
later.
≥ [DivX]: This function does not work.
Play status
BD-Video
PLAY
Items change
depending on the
media played.
Elapsed time in the title
0:05.14
0:20.52
Total time
1 ENG
Digital 3/2.1ch
e.g.,
DVD-RAM(VR)
PLAY
"AudioLR"
is selected
AudioLR
17
VQT2J83
Advertisement
Table of Contents
