Specifications; Precautions Of Wireless Lan Connection - Panasonic DMP-BDT120 Operating Instructions Manual

Specifications

Reference
Signal system
Operating temperature
range
Operating humidity
range
Video output
Audio output
Digital audio output
HDMI AV output
SD card slot
USB slot
Ethernet
Wireless LAN
[BDT221] [BDT220]
LASER Specification
Power supply
Power consumption
Power consumption in
standby mode
Power consumption in
quick start standby
mode
Dimensions (WkHkD)
Including the projecting
parts
Mass
≥ Specifications are subject to change without notice.
≥ This unit supports "HDAVI Control 5" function.
10
(10) VQT3V49
PAL/NTSC
i5 oC to i35 oC
10 % to 80 % RH (no
condensation)
Output level: 1.0 Vp-p (75 ≠)
Output connector: Pin jack
(1 system)
Output level: 2 Vrms (1 kHz,
0 dB)
Output connector: Pin jack
Number of connectors:
2 channel
1 system
Optical digital output (Optical
terminal)
Output connector: Type A
(19 pin) 1 system
1 system
USB2.0
2 system
10BASE-T/100BASE-TX
1 system
Standard Compliance:
IEEE802.11 b/g/n
Frequency range: 2.4 GHz
band
Security: WPA /WPA2
TM TM
(Encryption Type: TKIP/AES,
Authentication Type: PSK),
WEP (64 bit/128 bit)
Class 1 LASER Product
Wave length: 790 nm (CDs)/
660 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous
radiation is emitted with the
safety protection
AC 220 to 240 V, 50 Hz
Approx. 9.9 W
Approx. 0.1 W
Approx. 3.2 W
430 mmk38 mmk185 mm
Approx. 1.5 kg
Precautions of wireless
LAN connection
The following limits are in place regarding the
usage of this unit or Wireless LAN adaptor. You
must be aware of these limits before using these
devices.
Panasonic will in no way be responsible for any
incidental damage which may arise due to a
failure to obey these limits, or to any condition of
use or disuse of these devices.
≥ Data transmitted and received over radio
waves may be intercepted and monitored.
≥ This unit or Wireless LAN adaptor contains
delicate electronic components.
Please use these devices in the manner in
which they were intended and follow the
following points:
– Do not expose these devices to high
temperatures or direct sunlight.
– Do not bend, or subject these devices to
strong impacts.
– Keep these devices away from moisture.
– Do not disassemble or alter these devices in
any way.
Declaration of Conformity (DoC)
Hereby, "Panasonic Corporation" declares that this product
is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our
R&TTE products from our DoC server:
http://www.doc.panasonic.de
Contact in the EU: Panasonic Services Europe, a Division of
Panasonic Marketing Europe GmbH,
Panasonic Testing Centre, Winsbergring 15, 22525
Hamburg, Germany
This product is intended to be used in the following
countries.
Austria, Belgium, Bulgaria, Cyprus, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary,
Ireland, Italy, Iceland, Liechtenstein, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, United Kingdom, Switzerland
This product is intended for general consumer. (Category 3)
The WLAN feature of this product shall exclusively be used
inside buildings.
This product on purpose to connect to access point of
2.4 GHz WLAN.