Example 3
Connecting DVD Recorder / VCR and Satellite receiver
TV, DVD Recorder / VCR and Satellite
Rear of the TV
AC 220-240 V
50 / 60 Hz
Mains lead
■
Connecting to the network environment (Network connections)
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a
broadband network environment.
•
If you do not have any broadband network services, please consult your retailer for assistance.
•
Connect with LAN cable (Wired connection) or Wireless LAN Adaptor (Wireless connection).
•
Setup of the network connection will start after the tuning (when first using the TV)
Rear of the TV
Wired connection
Less
than
10 cm
Note
•
For more information of the network connections
12
Aerial input terminal
Fully wired HDMI
compliant cable
Wireless connection
Wireless LAN Adaptor and Extension cable
"Optional accessories" (p. 6)
•
Connect to the USB 1 or 2 port.
LAN cable
Less
than
10 cm
Internet
environment
Fully wired
SCART cable
Recorder/
HDMI
AV
DVD Recorder or VCR
Satellite receiver
RF OUT
RF IN
Ferrite core - Large size (supplied)
Installing the Ferrite core
Pull back the tabs
(in two places)
(p. 69)
RF cable
Fully wired
HDMI
compliant
cable
Fully wired
SCART
cable
AV 2
AV 1 HDMI
RF cable
(p. 14, 15)
environment
Access point
Wind the cable
Press the cable
twice
through and close
Terrestrial
aerial
RF OUT
RF IN
RF cable
Internet