Table of Contents
Advertisement
Message
Software successfully updated.
Press EXIT to continue.
Software update failed. Please try again later.
Press EXIT to continue.
This timer will not follow the TV Guide
information.
Press OK to continue, RETURN to restore
original timer.
Timer already expired !
Timer Event Due to Start
:
has been
programmed for External recording
at
:
Timer incorrect !
Timer overlap.
Press OK to keep, RETURN to edit.
Tuner Locked
Press EXIT to unlock.
Any timer programme in progress will
also be deleted.
Unable to download, please check equipment
Media Player
Cannot read file
No SD card inserted
No valid file to play
Please confirm the SD card is OK
This operation is not possible
Glossary
AVCHD
Advanced Video Codec High Definition - A standard
for high definition video cameras that can be used to
record and play high resolution HD images
DVB
Digital Video Broadcasting
DVD
Digital Versatile Disc
DVI
Digital Visual Interface - A high quality video interface
standard to connect to the display
EPG
Electronic Programme Guide - A digital guide
showing scheduled programmes
HDMI
High-Definition Multimedia Interface - A digital audio
and video interface for transmitting uncompressed
digital signals on a single cable
JPEG
Joint Photographic Experts Group - A standard for
compressing colour still pictures
MPEG2
Moving Picture Experts Group phase 2 - A standard for
efficiently compressing and expanding colour videos
Meaning / Action
The software updating is finished.
Perform "System Update Search Now" in System Update (p. 49).
If this is still unsuccessful, there may not be any new software available.
If you edit the start time or end time of Guide link programming more than
10 minutes, it will no longer be performed as Guide link programming.
The programming will be performed according to the time setting.
The starting time in Timer Programming has already passed. Set the
timer correctly (p. 43).
This message will appear 2 mins. before timer programming event for
external recording due to start.
Set the start and end times in Timer Programming correctly (p. 43).
T imer programming events are overlapped. Press the OK button to keep
the overlapped setting. "Ext Rec." is given priority over "Reminder". When
two or more "Ext Rec." overlap, the first timer programming event starts and
finishes as programmed. The next timer programming event can then start.
If you want to unlock the tuner, cancel Direct TV Recording (p. 58 and
p. 60) or Ext Rec. of Timer Programming (p. 43).
The tape or disc is active. Stop the equipment and try again.
The file is damaged or unreadable.
The TV does not support the format.
(For the applicable formats and data
Confirm the SD Card is inserted correctly.
The card has no data.
The inserted SD Card has a problem.
The selected operation is not available.
NICAM
Near Instantaneous Companded Audio Multiplex -
A format for digital sound over television
NTSC
National Television System Committee - One of the
television signals used in USA, etc.
RF
Radio Frequency - Signal received from terrestrial aerial
RGB / S-Video / Video
Choose between these three video formats depending
on personal preference and equipment requirement
(RGB - Red, Green and Blue)
SCART
21 pin connection used for video, audio and switching
signals (Also known as Euro SCART and Peritel)
Shop viewing environment
Shop viewing environment is the demonstration
mode to explain main features of this TV in an easy
understandable way. This mode will work if you select
"Shop" in "Auto Setup" (p. 12 and p. 13).
SPDIF
A standard audio transfer file format
VCR
Video Cassette Recorder
p. 67)
73
Advertisement
Table of Contents
