Watch Tv - Philips PFL42x8 User Manual

On-screen remote control (OSRC)
You can also control connected
HDMI-CEC-enabled devices through other
buttons that are available through the
On-Screen Remote Control. Make sure that
Easylink is switched on after connection.
Read more about Easylink in Connect your
TV > Set up Easylink devices > Control
devices (Page 55).
To access the OSRC
1. While you watch a connected device,
press OPTIONS.
2. Select [Show remote control], then press
OK.
3. Select an on-screen button, then press
OK.
Smartphone control
With the smartphone application 'Philips
MyRemote', you can use your smartphone
as a secondary remote and even as a
keyboard. You can also watch a slideshow of
the images in your smartphone on the TV.
Note: Make sure that your TV and
smartphone are connected to the same local
network. For more information, see
Connect your TV > Connect to a network
and the Internet (Page 56).
Follow these instructions to download the
application 'Philips MyRemote':
1. Visit the Apple App store or Google Play
to download the application 'Philips
MyRemote' on your smartphone.
2. Follow the instructions provided at the
applications store.
EN 12

Watch TV

Switch TV on or off
Switch the TV on

Connect the TV to the mains outlet
and switch on the main power.

If the TV is not switched on, the
standby LED remains off. Press
the TV.

If the standby LED is lit, press
remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control
and want to switch on the TV from standby,
press any button the TV.
Switch TV to standby
Press on the remote control.
The standby LED on the TV switches to red.
Switch off the TV
Press on the TV.
The standby LED switches to off.
Note: Though your TV consumes very little
energy when it is in standby or switched off,
it does use some energy. If you are not going
to use the TV for an extended period of
time, disconnect the TV from the mains plug.
on
on the