Adjusting Sound Settings; Spdif Output; Speaker Select; Selecting The Sound Mode - Samsung LA22C450 User Manual

Basic Features

Adjusting sound settings

¦
Equalizer
Adjusts the sound mode.
: Adjusts the balance between the right and
Balance L/R
■
left speaker.
100Hz / 300Hz / 1KHz / 3KHz / 10KHz
■
Adjustment): Adjusts the level of specific bandwidth
frequencies.
Reset : Resets the equalizer to its default settings.
■
Sound Systems, Etc.
¦
Virtual Surround (Off / On)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers or headphones using
HRTF (Head Related Transfer Function) technology.
✎
If Speaker Select is set to External Speaker, Virtual
Surround is disabled.
Dialog Clarity (Off / On)
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can
be heard more clearly when viewing a show.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night : This mode provides an improved sound
■
experience compared to Normal mode, making almost
no noise. It is useful at night.

Speaker Select

A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎
When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
✎
When Speaker Select is set to External Speaker, you
should use these settings.
x
TV Speaker: Off , External speaker: On
✎
When Speaker Select is set to TV Speaker, you
should use these settings.
x
TV speaker: On , External speaker: On
✎
If there is no video signal, both speakers will be mute.
16
English

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as a DVD player.
Audio Format:
■
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎
(Bandwidth
By connecting to 5.1ch speakers in a dolby digital
setup, maximize your interactive 3D sound experience.
Audio Delay:
■
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
FM Transmitter (LA26C450/LA32C450 only)
✎
Not available in some locations
You can listen to TV sound from FM receiver speaker by
transmitting audio signals by FM frequencies.
✎
For more detailed information, refer to "
Setup". (P. 31)
Connecting a FM Transmitter
Insert FM Transmitter Module into the Socket which is
located at the back side of TV
FM Transmitter (Off / On)
■
FM Frequency
■
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.

Selecting the Sound Mode

¦
When you set to Dual l ll, the current sound
mode is displayed on the screen.
A2
Stereo
NICAM
Stereo
During the reception of a digital TV
Correct audio-video mismatch, when
TV Side Panel
FM Transmitter
: Turns FM transmitter on/off.
: Sets FM transmitter frequency.
Audio Type Dual I-II
Mono Mono
Stereo ↔ Mono
Stereo
Dual I ↔ Dual II
Dual
Mono Mono
Mono ↔ Stereo
Stereo
Mono ↔ Dual I
Dual
Dual II
POWER
P
FM Transmitter
MEDIA.P
I-II
DUAL
Default
Automatic
change
Dual I
Automatic
change
Dual I