Advertisement
Create waves (Fig.5)
1 Select the small curling attachment (
brush (
2 Wind a section of hair round the brush.
3 Hold the barrel in the position for max.10 seconds. Then unwind the
section of hair to remove the Slide-on brush (
4 To style the rest of your hair, repeat steps 2-3.
Create crimps (Fig.6)
1 Select crimping/straightening attachment (
curved surfaces (
•
To remove the the crimping/straightening plates, grab each
protruded side of the plate (
2 Press the lever (
hair between the crimping plates.
3 Release the lever and keep the plates together for 5 to 10 seconds.
4 Press the lever to open the plates and place the next section of hair
between the plates. Make sure there is an overlap.
5 Repeat this process until you have reached the hair tip.
6 To style the rest of your hair, repeat steps 2 to 5.
Create straight sleek style and flicks (Fig.7)
1 Make sure that the flat surfaces (
the lever (
between the straightening plates.
2 Slide down slowly the length of the hair in a single motion from root
to end, without stopping to prevent overheating.
•
To create your desired type of flick, turn the styler half-circle
inwards (or outwards) when it reaches the last 3-5 cm of the hair
tip. Hold in that position for 2 to 3 seconds, and then release it.
3 To style the rest of your hair, repeat steps 1 to 2.
) onto barrel.
) are facing each other.
) to open the attachment and place a section of
) to open the attachment and place a section of hair
). Then slide the Slide-on
).Make sure that the
) and pull it off.
) are facing each other. Press
) from your hair.
Advertisement
