Panasonic Viera TX-L19D28BW Operating Instructions Manual page 30

How to Use Menu Functions
Menu
Timer Programming
Off Timer
VIERA Link
Q-Link
AV1 / AV2 out
Standby Power
Save
Intelligent Auto
Standby
Q-Link Download
Child Lock
Favourites Edit
Channel List
Auto Setup
Channel Sorting
by Region
Manual Tuning
Update Channel
List
New Channel
Message
Signal Condition
Channel List
Auto Setup
Manual Tuning
30
Item
Sets a timer to remind watching or record forthcoming programmes (p. 42)
Sets the time until the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) (p. 17)
Sets to use VIERA Link functions (Off / On) (p. 63)
Selects which AV terminal is to be used for data communication between this TV and a
compatible recorder (AV1 / AV2) (p. 62)
Select the connected terminal to the recorder even it is not compatible with Q-Link.
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV1 / AV2 / AV3 / Monitor)
Monitor: Image displayed on screen
Component, PC and HDMI signals cannot be outputted.
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption (Off / On) (p. 64)
This function is available when "VIERA Link" is set to "On".
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption (Off / On (With reminder) / On (No reminder)) (p. 64)
This function is available when "VIERA Link" is set to "On".
Downloads analogue channel information to a Q-Link compatible equipment
connected to the TV
Locks a channel / AV input to prevent access to it (p. 44)
Creates list of favourite DVB channels (p. 39)
Skips the unwanted DVB channels or edits DVB channels (p. 39)
Automatically sets the DVB channels received in the area (p. 36)
Automatically sorts tuned channels according to the available region (p. 38)
Sets the DVB channels manually (p. 38)
Updates DVB Channel List while keeping your settings (p. 40)
Selects whether to give a notification message when a new DVB channel is found
(Off / On) (p. 40)
Checks the DVB signal condition (p. 40)
Skips the unwanted Analogue channels or edits Analogue channels (p. 41)
Automatically sets the Analogue channels received in the area (p. 37)
Sets the Analogue channels manually (p. 41)
Adjustments / Configurations (alternatives)