Fine Tuning
Use to make small adjustments to the tuning of an individual channel (affected by weather
conditions, etc.)
Manual Tuning
Set Analogue channel manually after Auto Setup.
If a VCR is connected with only the RF cable, select programme position "0".
Set Analogue
channel
Analogue Manual Tuning
manually
Programme
Fine Tuning
Manual Tuning
Analogue
Manual Tuning
Select the programme position
Any new services found will be added to the DVB Service List (p. 25) automatically.
Add
ADD New DVB Services
DVB channel
Please wait
automatically
Prog.
Channel
ZDF
ARD
Add New
DVB Services
This will take about 3 mins.
Selects whether to give a noti¿ cation message when a new DVB service is found. (Off / On)
Display a
noti¿ cation
message
New DVB Service Found!
Press OK to start Auto Setup
Press EXIT to lgnore.
Selecting Auto Setup will delete
New Service
current Profile and Childlock settings
Message
Selects a channel and checks the DVB signal condition.
Use for adjusting the direction of the aerial.
Check
•
To change the programme during the menu appears
DVB signal
DVB Signal Condition
DVB Signal
DVB Programme
Condition
Signal Quality
Signal Strength
1
[CH33]
2
78
1
41
1
2
3
4
5
6
7
8
9
0
VCR
5
69
Service Name
Net ID.
TS ID.
Quality
•
Selecting OK (Auto Setup) will delete
current Pro¿ le and Childlock settings.
[70] CBBC Channel
Off
0
5
10
Select the channel
start
•
The new service is added with the current settings
saved as they are.
Signal Quality:
•
Green bar
•
Yellow bar
•
Red bar
Search and store
search
store
Good
Poor
Bad (Check the aerial)
29