Getting Started; Charging The Battery; Recharging The Battery - Mitsubishi T255 User Manual

Getting Started

Charging the Battery

The battery must be fully charged before using the phone for the first
time. To reach full capacity of NiMH battery, charge and discharge the
new battery three times before use. To charge the battery, follow
procedure below. To fully discharge the battery, leave the phone on until
it shuts itself off.
1. Make sure the battery is properly installed on your phone.
2. Connect the AC Adapter to the socket on the side of the phone.
Connect the other end to a standard wall outlet. The battery level
indicator
3. Disconnect the AC Adapter when the Battery Full message displays.

Recharging the Battery

When the battery needs to be recharged, three short tones sound. The
Low Battery icon and message flash on the display.
Connect the AC Adapter to the socket on the side of the
1
phone.
2
Connect the AC Adapter to a standard wall outlet. The
battery begins charging when the AC adapter is connected
to the phone.
✱
8
flashes during charging.
If the phone is left on despite a low battery alarm, the phone automatically shuts itself off to
protect the battery from over-discharging.