Setup The Network Connection - Panasonic Viera TX-L32DT30B Operating Instructions Manual

Setup the network connection

4
Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 16, 95).
•
To setup the wireless connection, the Wireless LAN Adaptor (optional accessory) is required.
Please note that this TV does not support wireless public access points.
•
Ensure the network connections (p. 11) and network environment are completed before starting setup.
Select the network type
Network Setup
Select Wired or Wireless
Wired Wireless
■
[Wired]
1. Select [Auto]
Acquire IP Address
Auto
select
access
2. Go to the next step
(Press twice)
■
[Wireless]
Select the connection type
Connection Type
Please select network connection type.
Search for access point
WPS(Push button)
[Search for access point]
Access points found automatically are listed.
1. Select your desired access point
Available Access Points
No. SSID Wireless type
1 Access Point A 11n(2.4GHz)
2 Access Point B 11n(5GHz)
3 Access Point C 11n(5GHz)
•
To search access points again
(yellow)
2. Access the encryption key input mode
Encryption Key Setting
Connection will be made with the following settings:-
SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
3. Enter the encryption key of the access point
Access Point Settings
Encryption key
A B C D E F G H I
U V W X Y Z 0 1
a b c d e f g h i
u v w x y z ( ) +
[Wired]
[Wireless]
Set later
Manual
Automatically setup is done and the test of the network
connection starts.
•
4
To set manually, select [Manual] and set each item. For
details (p. 88)
Encrypt Reception
•
•
If the selected access point is not encrypted, the confirmation screen
will be displayed. It is recommended to select the encrypted access
point.
Set characters
J K L M N O P Q R S T
2 3 4 5 6 7 8 9 ! : #
j k l m n o p q r s t
- . * _
1 2 3
.!:# abc def
4 5 6
ghi jkl mno
7 8 9
pqrs tuv wxyz
0
"Wired connection" (p. 11)
"Wireless connection" (p. 11)
•
To setup later on or skip this step
select
access
Select [Set later] or
Connection Test
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection for VIERA Connect.
select
access
select
access
: Encrypted access point
For the information of the
highlighted access point
•
You can set characters by using
select
numeric buttons.
"Characters table for numeric
set
buttons" (p. 111)
EXIT
: succeeded
The test is successful
and the TV is connected
to the network.
: failed
Check the settings and
connections, and then
select [Retry].
•
To set manually (p. 91)
(red)
Store
BACK/
RETURN
13