Panasonic Viera TX-L32DT35E Operating Instructions Manual page 93

4
Select [Connection Test] and access to test
Network Setup
Connection Test Access
Network Type Wireless
Access Point Settings
IP/DNS Settings
Network Link Settings
Software Update
MAC Address ab-cd-ef-gh-ij-kl
Connection Test
Check access point connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
■
[WPS(Push button)]
WPS(Push button)
1) Please press the 'WPS' button on the access
point until its light flashes.
2) When the light is flashing select 'Connect' on
TV.
If you are unsure, please check the instruction
manual of the access point.
Connect
■
[WPS(PIN)]
1
Select your desired access point
Available Access Points
No. SSID Wireless type
1 Access Point A 11n(2.4GHz)
2 Access Point B 11n(5GHz)
3 Access Point C 11n(5GHz)
•
To search access points again
(yellow)
2
Enter the PIN code to the access point, and then select [Connect]
WPS(PIN)
Please register the following PIN codes on the
access point.
PIN code : 12345678
Select 'Connect' after entering and saving the
settings on the access point.
Connect
■
[Search for access point]
Access points found automatically are listed.
1
Select your desired access point
Available Access Points
No. SSID Wireless type
1 Access Point A 11n(2.4GHz)
2 Access Point B 11n(5GHz)
3 Access Point C 11n(5GHz)
•
To search access points again
(yellow)
select
access
Performs automatic testing of the network connection for the TV. (It takes a while
to test.)
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections, and then perform this function again.
If you continue to have difficulty, please contact your internet service provider.
press the WPS button on the access point until the light flashes
•
Ensure that your access point supports WPS for this setup.
•
WPS : Wi-Fi Protected Setup™
Encrypt Reception
•
Ensure that your access point supports WPS for this setup.
•
For the information of the highlighted access point
Encrypt Reception
: Encrypted access point
•
For the information of the highlighted
access point
connect the Wireless LAN Adaptor and the access point
select
access
select
access
•
To set manually
(red)
•
To set manually
(red)
93