Table of Contents
Advertisement
Entering text
To write SMS text messages, store names in memory, or use the scratchpad,
you will enter and edit text in the display.
In the upper right corner of the display, the
alpha mode and the
Text and numbers can be now be entered or edited directly from the keypad.
Press
to toggle between lower and upper case. Press and hold
entire words in all upper case. Press and hold
lower case.
1
Press any key briefly to display the first character associated
with that key and show all the other available characters at the
top of the display.
2
To enter text, press the key with the desired character
repeatedly until it appears in the display.
3
To enter a number, press and hold the key with correspond-
ing number.
4
If two characters are on the same key, wait for the display at
top of screen to clear or press
key again.
Press Clear
5
the entire entry.
6
Use
insert characters or make corrections.
Example
To enter 'Card' in the display,
• Press
, then press
• Select Write new.
• Press
to go to upper case mode,
briefly three times, C appears in the display.
• Wait for the cursor to move or press
notice that
briefly three times, r appears.
• Press
• Press
briefly once, d appears.
The word Card will now be in the display.
• Press
to exit from this example.
28
icon indicates upper case alpha mode is active.
to erase a character. Press and hold to delete
,
,
or
to locate the cursor in the text to
twice to select Messages.
is displayed. Press
icon indicates lower case
again to type entirely in
before pressing the same
icon is displayed. Press
to move to the next position,
briefly once, a appears.
to type
Advertisement
Table of Contents
