4
Select Ring, Ramping, Keys, Conversation or
Alarm tones (G340).
The display will name the volume type to be adjusted.
5
Use
Press OK
6
7
Press Back
✱
During a call, you can adjust the volume by using
Ramping
Ramping causes the incoming ring tone to gradually increase to maximum
volume level if the call is not answered after the first ring.
1
Press
2
Select Tones.
3
Select Volume.
4
Select Ramping.
Select On or Off.
5
Press Back
6
Backlight - setting
This option controls the backlight during key entry or incoming ring tone.
There are two settings:
• On for 10 sec.: Display and key backlight stay on for
10 seconds after the last key press or incoming call.
• Off: Backlight stays off.
Press
1
2
Select Display.
Select Backlight.
3
Select either of the two settings. Press
4
Press Back
5
or
to adjust the setting.
to confirm.
or
For ring tone and key tone, the lowest setting is off.
. Select Settings.
or
. Select Settings.
or
to return to the standby display.
to return to the standby display.
to return to the standby display.
or
.
to confirm.
57